Skroutz.mt

Flex ORE 125-2 Electric Eccentric Sander 125mm Electric 200W with Speed Control and with Suction System 429872
Sanders

Flex ORE 125-2 Electric Eccentric Sander 125mm Electric 200W with Speed Control and with Suction System 429872

TECHNICAL CHARACTERISTICS

  • POWER: 200 W
  • RPM: 8000-13000 MIN
  • OSCILLATION RANGE: 2.0 MM
  • SANDING PAD DIAMETER: 125 MM
  • DUST EXTRACTION HOSE CONNECTION DIAMETER: 27 MM
  • CABLE LENGTH: 4.0 M
  • WEIGHT: 1.2 KG
  • ...

TECHNICAL CHARACTERISTICS

  • POWER: 200 W
  • RPM: 8000-13000 MIN
  • OSCILLATION RANGE: 2.0 MM
  • SANDING PAD DIAMETER: 125 MM
  • DUST EXTRACTION HOSE CONNECTION DIAMETER: 27 MM
  • CABLE LENGTH: 4.0 M
  • WEIGHT: 1.2 KG
  • INCLUDES VELCRO PAD 436348 PES WITH FILTER 407984
See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    2

    Very fine sanding, sensitive materials, finishing

  • Oscillations

    • High number of strokes → more intense and faster sanding
    • Low number → gentler, suitable for sensitive surfaces

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • Weight (Net) 1200 gr
  • See all
239 00 €
Delivery by Mon, 10 Aug
14,00 €   shipping cost
Sent from Greece
From Forto 4.9 (14)
4.9 (14 reviews)
Greece
1 piece
See Power Tools on the page of Forto
Review the product
Product report

Description

Description

TECHNICAL CHARACTERISTICS

  • POWER: 200 W
  • RPM: 8000-13000 MIN
  • OSCILLATION RANGE: 2.0 MM
  • SANDING PAD DIAMETER: 125 MM
  • DUST EXTRACTION HOSE CONNECTION DIAMETER: 27 MM
  • CABLE LENGTH: 4.0 M
  • WEIGHT: 1.2 KG
  • INCLUDES VELCRO PAD 436348 PES WITH FILTER 407984

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Net Weight
1200 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
200 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
13000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Pulses
26000 opm

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
Yes

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Hard Case
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

TECHNICAL CHARACTERISTICS

  • POWER: 200 W
  • RPM: 8000-13000 MIN
  • OSCILLATION RANGE: 2.0 MM
  • SANDING PAD DIAMETER: 125 MM
  • DUST EXTRACTION HOSE CONNECTION DIAMETER: 27 MM
  • CABLE LENGTH: 4.0 M
  • WEIGHT: 1.2 KG
  • INCLUDES VELCRO PAD 436348 PES WITH FILTER 407984

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Net Weight
1200 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
200 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
13000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Pulses
26000 opm

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
Yes

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Hard Case
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

239,00 €
14,00 €   shipping cost