Skroutz.mt

Plus Cut 16M Single-phase Pump Waste Water / Sewage 1.6hp 230130
Submersible Water Pumps

Plus Cut 16M Single-phase Pump Waste Water / Sewage 1.6hp 230130

Key features:

  • Power Supply: Electric current
  • Single-phase power supply
  • Horsepower: 1.6 hp
  • Power: 1200W
  • Equipped with cutters
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    10

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Submersible sewage pump from the manufacturer Plus, used for pumping dirty water, which may contain particles. The cutting system it has reduces the size of solid and fibrous materials such as paper, fabrics, plastic, etc., into small particles, which are removed through relatively small diameter pipes.

What is a single-phase sewage pump?

The term single-phase refers to the operating method of the pump's motor.

Single-phase pumps generate the necessary power required for wastewater transfer. They are typically used in residences or small commercial spaces, for transferring wastewater from toilets, sinks, or showers to the sewage system.

They are not suitable for high-flow or high-pressure applications. For larger needs, such as in commercial buildings or large installations, three-phase wastewater pumps are usually used, which can provide greater power and performance.

At a glance

  • Pump body made of stainless steel / cast iron
  • Cutter made of stainless steel
  • Pumped liquid temperature up to 35°C
  • Comes with 8m cable
  • Power supply: Electric Current
  • Motor Power (Hp): 1.60
  • Voltage (Volt): 220 Volt/50 Hz
  • Body material: Cast Iron
  • Impeller material: Cast Iron
  • Solid passage Φ(mm): 8
  • Maximum submersion depth (M): 5
  • Cable length (M): 8
  • Stainless steel casing 
  • Stainless steel cutter
  • Net weight (Kg): 20.80
  • Gross weight (Kg): 22.90
  • Package length (cm): 27.00
  • Package width (cm): 22.00
  • Package height (cm): 51.00

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.6 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1200 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
8 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
Yes

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
10 m

Maximum Head Height: 10


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
5 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Submersible sewage pump from the manufacturer Plus, used for pumping dirty water, which may contain particles. The cutting system it has reduces the size of solid and fibrous materials such as paper, fabrics, plastic, etc., into small particles, which are removed through relatively small diameter pipes.

What is a single-phase sewage pump?

The term single-phase refers to the operating method of the pump's motor.

Single-phase pumps generate the necessary power required for wastewater transfer. They are typically used in residences or small commercial spaces, for transferring wastewater from toilets, sinks, or showers to the sewage system.

They are not suitable for high-flow or high-pressure applications. For larger needs, such as in commercial buildings or large installations, three-phase wastewater pumps are usually used, which can provide greater power and performance.

At a glance

  • Pump body made of stainless steel / cast iron
  • Cutter made of stainless steel
  • Pumped liquid temperature up to 35°C
  • Comes with 8m cable
  • Power supply: Electric Current
  • Motor Power (Hp): 1.60
  • Voltage (Volt): 220 Volt/50 Hz
  • Body material: Cast Iron
  • Impeller material: Cast Iron
  • Solid passage Φ(mm): 8
  • Maximum submersion depth (M): 5
  • Cable length (M): 8
  • Stainless steel casing 
  • Stainless steel cutter
  • Net weight (Kg): 20.80
  • Gross weight (Kg): 22.90
  • Package length (cm): 27.00
  • Package width (cm): 22.00
  • Package height (cm): 51.00

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.6 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1200 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
8 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
Yes

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
10 m

Maximum Head Height: 10


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
5 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.