Skroutz.mt

Gardena Irrigation Programmer Table Electric 6 Stops
Irrigation Programmers

Gardena Irrigation Programmer Table Electric 6 Stops

Key features:

  • Power source: 230 V / 24 V
  • Applications: Smart Gardena app
See full description

  • Stations

    The maximum number of electric vans that can be used. For example, if I want to connect 4 electric vans to the programmer, then a programmer with at least 4 stops will be needed.

  • Protection Certification

    IPX4

    IPX4 indicates that the device is protected from water splashes from all directions. IP refers to ingress protection, X means there is no protection against dust, and 4 means that the device can withstand water splashes from any angle without affecting its operation.

  • Cyclic

    Watering is activated at recurring time intervals, regardless of the time of day. The user sets an interval (e.g., every 3/6/9 hours)
  • See all
299 00 €
Delivery Tue, 07 Jul - Mon, 13 Jul
14,00 €   shipping cost
Sent from Greece
From Psillas
Greece
1 piece
See Automatic Irrigation Equipment on the page of Psillas
Review the product
Product report

Description

Description

Capabilities

The GARDENA Smart Programmer allows flexible control of up to six separate irrigation zones via the GARDENA Smart App, for example in the GARDENA Micro-Drip system or the underground irrigation system. The system allows the setting of independent watering areas to ensure optimal irrigation of planting areas with different water requirements. In combination with a GARDENA smart sensor (not included), unnecessary watering is prevented for each watering zone and the best possible water management is ensured. A router is required for use, which is included in all GARDENA Smart System starter sets.

Upgrade your irrigation system

Most 24V valves can be controlled with the GARDENA smart irrigation control app. By simply replacing the control unit, you can turn your basic irrigation system, whether it is GARDENA or another brand, into a smart system controlled by the smart app.

Time-saving automatic irrigation

The smart irrigation system from GARDENA reliably and easily waters the entire garden. Up to 6 valves of 24V can be connected, which means you can have up to six different watering zones.

App-Controlled

Using the free GARDENA app for iOS, Android, and the internet, you can control your garden from anywhere. The GARDENA smart power can be controlled from the smart app. The watering cycle and duration can be easily adjusted.

Ideal for outdoor spaces

The GARDENA smart Irrigation Control programmer complies with IPX4 certification, making it splash-proof and suitable for outdoor use.


More free time in the garden

Do you need time to relax or someone to water your garden when you are away on vacation? GARDENA water programming devices feature smart functionality for flexible, convenient, and reliable irrigation.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Features & Settings

Mode
Electric

Mode

Electric
Access to a power outlet will be required. They have a 24v transformer and can be connected to solenoids that have a voltage of 24v.
Stops
6

Stops

The maximum number of electric vans that can be used. For example, if I want to connect 4 electric vans to the programmer, then a programmer with at least 4 stops will be needed.
Expandable
No

Expandable

You can use an extension board to increase the number of solenoid valves (stops) in your system for more flexibility.
Rain Sensor Connection
Yes

Rain Sensor Connection

The sensor connects to a special port of the programmer and functions as a switch, preventing unnecessary water consumption and protecting plants from overwatering.
Permanent Memory
No

Permanent Memory

Ensures that the watering schedule will not be lost even after a power outage. This way, when the power is restored, the programmer continues to operate normally with your settings, without needing to be programmed again from scratch!

Connection & Sockets

with Solenoid Valve
No

with Solenoid Valve

When the irrigation programmer has an electrovane, it means that it can automatically control the flow of water through electronic valves.

Protection & Performance

Protection Certification
IPX4

Protection Certification

IPX4

IPX4 indicates that the device is protected from water splashes from all directions. IP refers to ingress protection, X means there is no protection against dust, and 4 means that the device can withstand water splashes from any angle without affecting its operation.

Watering Settings

Time Delay
No

Time Delay

The time delay allows for postponing irrigation for a specific period without changing the main program. It is used for temporary interruption due to rain or maintenance, contributing to water conservation and adjusting irrigation to weather conditions.
Manual Watering
No

Manual Watering

Manual watering allows the activation of watering immediately, without affecting the scheduled program. It is useful for testing, additional watering during dry periods, or when immediate moisture is needed for the plants.
Weekly Scheduling
No

Weekly Scheduling

Allows the setting of different watering schedules for each day of the week, providing flexibility in adjusting the frequency and duration of irrigation according to the garden's needs.
Hourly Programming
No

Hourly Programming

It is the setting that determines the total watering duration. It shows how long the watering will last each time the programmer is activated.
Cyclic Programming
Yes

Cyclic Programming

Watering is activated at recurring time intervals, regardless of the time of day. The user sets an interval (e.g., every 3/6/9 hours)

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Capabilities

The GARDENA Smart Programmer allows flexible control of up to six separate irrigation zones via the GARDENA Smart App, for example in the GARDENA Micro-Drip system or the underground irrigation system. The system allows the setting of independent watering areas to ensure optimal irrigation of planting areas with different water requirements. In combination with a GARDENA smart sensor (not included), unnecessary watering is prevented for each watering zone and the best possible water management is ensured. A router is required for use, which is included in all GARDENA Smart System starter sets.

Upgrade your irrigation system

Most 24V valves can be controlled with the GARDENA smart irrigation control app. By simply replacing the control unit, you can turn your basic irrigation system, whether it is GARDENA or another brand, into a smart system controlled by the smart app.

Time-saving automatic irrigation

The smart irrigation system from GARDENA reliably and easily waters the entire garden. Up to 6 valves of 24V can be connected, which means you can have up to six different watering zones.

App-Controlled

Using the free GARDENA app for iOS, Android, and the internet, you can control your garden from anywhere. The GARDENA smart power can be controlled from the smart app. The watering cycle and duration can be easily adjusted.

Ideal for outdoor spaces

The GARDENA smart Irrigation Control programmer complies with IPX4 certification, making it splash-proof and suitable for outdoor use.


More free time in the garden

Do you need time to relax or someone to water your garden when you are away on vacation? GARDENA water programming devices feature smart functionality for flexible, convenient, and reliable irrigation.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Features & Settings

Mode
Electric

Mode

Electric
Access to a power outlet will be required. They have a 24v transformer and can be connected to solenoids that have a voltage of 24v.
Stops
6

Stops

The maximum number of electric vans that can be used. For example, if I want to connect 4 electric vans to the programmer, then a programmer with at least 4 stops will be needed.
Expandable
No

Expandable

You can use an extension board to increase the number of solenoid valves (stops) in your system for more flexibility.
Rain Sensor Connection
Yes

Rain Sensor Connection

The sensor connects to a special port of the programmer and functions as a switch, preventing unnecessary water consumption and protecting plants from overwatering.
Permanent Memory
No

Permanent Memory

Ensures that the watering schedule will not be lost even after a power outage. This way, when the power is restored, the programmer continues to operate normally with your settings, without needing to be programmed again from scratch!

Connection & Sockets

with Solenoid Valve
No

with Solenoid Valve

When the irrigation programmer has an electrovane, it means that it can automatically control the flow of water through electronic valves.

Protection & Performance

Protection Certification
IPX4

Protection Certification

IPX4

IPX4 indicates that the device is protected from water splashes from all directions. IP refers to ingress protection, X means there is no protection against dust, and 4 means that the device can withstand water splashes from any angle without affecting its operation.

Watering Settings

Time Delay
No

Time Delay

The time delay allows for postponing irrigation for a specific period without changing the main program. It is used for temporary interruption due to rain or maintenance, contributing to water conservation and adjusting irrigation to weather conditions.
Manual Watering
No

Manual Watering

Manual watering allows the activation of watering immediately, without affecting the scheduled program. It is useful for testing, additional watering during dry periods, or when immediate moisture is needed for the plants.
Weekly Scheduling
No

Weekly Scheduling

Allows the setting of different watering schedules for each day of the week, providing flexibility in adjusting the frequency and duration of irrigation according to the garden's needs.
Hourly Programming
No

Hourly Programming

It is the setting that determines the total watering duration. It shows how long the watering will last each time the programmer is activated.
Cyclic Programming
Yes

Cyclic Programming

Watering is activated at recurring time intervals, regardless of the time of day. The user sets an interval (e.g., every 3/6/9 hours)

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

299,00 €
14,00 €   shipping cost