The Switch Planet FGSD-1011HP connects eight devices via Fast Ethernet PoE+ ports and features one Gigabit Ethernet port and one SFP port. The eight PoE ports support IEEE 802.3af/at standards, with a power budget of up to 120 W. The operating mode switch selects between the standard 100 m distance and extension mode of up to 250 m, depending on the cable category.

• Type: Unmanaged Layer 2 switch
• Ethernet ports: 8 10/100BASE-TX RJ45 ports and 1 10/100/1000BASE-T RJ45 port, with MDI/MDI-X
• SFP port: 1 100/1000BASE-X SFP/mini-GBIC port
• PoE ports: 8, on ports 1 to 8
• PoE standards: IEEE 802.3af and IEEE 802.3at
• PoE power type: End-span, with pins 1/2 (+) and 3/6 (-)
• PoE output per port: 52 V DC, up to 600 mA and 30 W with IEEE 802.3at, or up to 300 mA and 15.4 W with IEEE 802.3af
• PoE power budget: 120 W
• Powered devices: Up to 8 at 7 W or 15.4 W per device, and up to 4 at 30 W per device
• Switching architecture: Store and Forward
• Switching capacity: 5.6 Gbps
• Forwarding rate: 4.16 Mpps for 64-byte packets
• MAC address table: 4,000 entries, with automatic learning
• Maximum packet size: 9K bytes
• Flow control: Back pressure in half duplex and IEEE 802.3x pause frames in full duplex
• Indicators: Power, PoE, and per-port link/activity
• Extension mode: Distance of up to 250 m, depending on the cable category, compared to 100 m in standard mode
• Power supply: AC 100–240 V, up to 2.5 A
• Power consumption: 135 W
• Dimensions: 220 × 150 × 44 mm
• Weight: 1,220 g
• Electrostatic discharge protection: ±6 kV DC contact and ±8 kV DC air
• Surge immunity: ±4 kV
• Networking standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.3af, and IEEE 802.3at
• Certifications: CE and FCC
• Operating temperature: 0 to 50 °C
• Storage temperature: -10 to 70 °C
• Operating and storage relative humidity: 5–95%, non-condensing
• Mounting: Rack-mountable