Skroutz.mt

Total Adapters HEX Set 2pcs
Adapters for Sockets & Bits

Total Adapters HEX Set 2pcs Code: TAC461601

The magnetic drill adapter is made of Chrome - Vanadium. Suitable for all tools with a 1/4'' square socket as well as a simple chuck. 

The magnetic drill adapter is made of Chrome - Vanadium. Suitable for all tools with a 1/4'' square socket as well as a simple chuck. 

See full description See full description
3 00 €
Delivery by Thu, 09 Jul
14,00 €   shipping cost
Sent from Greece
From Siapas
Greece
3 pieces
See Ratchets & Sockets on the page of Siapas
Product report

Description

Description

The magnetic drill adapter is made of Chrome - Vanadium. Suitable for all tools with a 1/4'' square socket as well as a simple chuck. 

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
TAC461601
Usage
for Screwdriver Bits
Drive Size
HEX

Drive Size

The size of the port available on the adapter, for connection with a chestnut or a manifold.
Adapter Output
Bit Holder

Adapter Output

The size of the output available on the adapter, for connection with nuts and other components that have a corresponding size socket.
Pneumatic
No

Pneumatic

Adapter made of hardened metal, resistant to vibrations or impacts during work. It is suitable for demanding tasks and for use with air tools.
Magnetic
Yes

Magnetic

It has a magnet in the head slot, which helps to hold the screw or bolt.
Electronic Torque Wrench
No

Electronic Torque Wrench

Converts chestnuts or hazelnuts into a digital torque key. It is suitable for tasks that require precision in tightening.
Pieces
2 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (7)

Reviews

3.1
7
3.1
Review this product
  1. 2
  2. 1
  3. 2
  4. 2 stars
    0
  5. 2
Review this product
  • M_X7904
    1
    5 out of 5 members found this review helpful
    M_X7904

    Crooked extensions along the longitudinal axis, good for mixing frappes and for hitting the bearings of the power tool. Before I made the first screw and just testing by inserting and removing a bit to see how well it "holds", I found that the magnet came off with the bit on one extension. Weak magnet in terms of holding the screw in both extensions. Test bit: PZ2, test screw: chipboard screw 4 X 40. They do not have the additional internal spring to hold the bit. 3€ wasted.

    Translated from Greek ·
    Did you find this review helpful?
  • 3
    GIORGOS_LYKOGEORGOS

    Verified purchase

    This review is about a variation of the product

    the magnet is not good

    Translated from Greek ·
    Did you find this review helpful?
  • 3
    zafis2009

    Unfortunately, during tightening, it broke without any impact using a 60Nm torque wrench

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    1 out of 1 members found this review helpful
    a114nick
    This review is about a variation of the product

    It is not one of the best of its kind. It simply does its job.

    Translated from Greek ·
    Did you find this review helpful?
  • 1
    1 out of 1 members found this review helpful
    Basilis_Travlos

    Low price but they are very weak. The screw falls with minimal movement. They are not worth it.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    AKIS477

    Verified purchase

  • 5
    jixen6

    Verified purchase

    This review is about a variation of the product

  • M_X7904
    1
    M_X7904

    Crooked extensions along the longitudinal axis, good for mixing frappes and for hitting the bearings of the power tool. Before I made the first screw and just testing by inserting and removing a bit to see how well it "holds", I found that the magnet came off with the bit on one extension. Weak magnet in terms of holding the screw in both extensions. Test bit: PZ2, test screw: chipboard screw 4 X 40. They do not have the additional internal spring to hold the bit. 3€ wasted.

    Translated from Greek ·
    5
  • 3
    GIORGOS_LYKOGEORGOS

    the magnet is not good

    Translated from Greek ·
    0
  • 3
    zafis2009

    Unfortunately, during tightening, it broke without any impact using a 60Nm torque wrench

    Translated from Greek ·
    0
  • 4
    a114nick

    It is not one of the best of its kind. It simply does its job.

    Translated from Greek ·
    1
  • 1
    Basilis_Travlos

    Low price but they are very weak. The screw falls with minimal movement. They are not worth it.

    Translated from Greek ·
    1
  • See all

Description & Specifications

The magnetic drill adapter is made of Chrome - Vanadium. Suitable for all tools with a 1/4'' square socket as well as a simple chuck. 

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
TAC461601
Usage
for Screwdriver Bits
Drive Size
HEX

Drive Size

The size of the port available on the adapter, for connection with a chestnut or a manifold.
Adapter Output
Bit Holder

Adapter Output

The size of the output available on the adapter, for connection with nuts and other components that have a corresponding size socket.
Pneumatic
No

Pneumatic

Adapter made of hardened metal, resistant to vibrations or impacts during work. It is suitable for demanding tasks and for use with air tools.
Magnetic
Yes

Magnetic

It has a magnet in the head slot, which helps to hold the screw or bolt.
Electronic Torque Wrench
No

Electronic Torque Wrench

Converts chestnuts or hazelnuts into a digital torque key. It is suitable for tasks that require precision in tightening.
Pieces
2 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (7)

3.1
7
3.1
Review this product
  1. 2
  2. 1
  3. 2
  4. 2 stars
    0
  5. 2
Review this product
  • M_X7904
    1
    5 out of 5 members found this review helpful
    M_X7904

    Crooked extensions along the longitudinal axis, good for mixing frappes and for hitting the bearings of the power tool. Before I made the first screw and just testing by inserting and removing a bit to see how well it "holds", I found that the magnet came off with the bit on one extension. Weak magnet in terms of holding the screw in both extensions. Test bit: PZ2, test screw: chipboard screw 4 X 40. They do not have the additional internal spring to hold the bit. 3€ wasted.

    Translated from Greek ·
    Did you find this review helpful?
  • 3
    GIORGOS_LYKOGEORGOS

    Verified purchase

    This review is about a variation of the product

    the magnet is not good

    Translated from Greek ·
    Did you find this review helpful?
  • 3
    zafis2009

    Unfortunately, during tightening, it broke without any impact using a 60Nm torque wrench

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    1 out of 1 members found this review helpful
    a114nick
    This review is about a variation of the product

    It is not one of the best of its kind. It simply does its job.

    Translated from Greek ·
    Did you find this review helpful?
  • 1
    1 out of 1 members found this review helpful
    Basilis_Travlos

    Low price but they are very weak. The screw falls with minimal movement. They are not worth it.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    AKIS477

    Verified purchase

  • 5
    jixen6

    Verified purchase

    This review is about a variation of the product

  • M_X7904
    1
    M_X7904

    Crooked extensions along the longitudinal axis, good for mixing frappes and for hitting the bearings of the power tool. Before I made the first screw and just testing by inserting and removing a bit to see how well it "holds", I found that the magnet came off with the bit on one extension. Weak magnet in terms of holding the screw in both extensions. Test bit: PZ2, test screw: chipboard screw 4 X 40. They do not have the additional internal spring to hold the bit. 3€ wasted.

    Translated from Greek ·
    5
  • 3
    GIORGOS_LYKOGEORGOS

    the magnet is not good

    Translated from Greek ·
    0
  • 3
    zafis2009

    Unfortunately, during tightening, it broke without any impact using a 60Nm torque wrench

    Translated from Greek ·
    0
  • 4
    a114nick

    It is not one of the best of its kind. It simply does its job.

    Translated from Greek ·
    1
  • 1
    Basilis_Travlos

    Low price but they are very weak. The screw falls with minimal movement. They are not worth it.

    Translated from Greek ·
    1
  • See all
3,00 €
14,00 €   shipping cost