Skroutz.mt

Ingco Diamond Crown Threading SDS for Firebrick and Tile 900gr
Hole Saws

Ingco Diamond Crown Threading SDS for Firebrick and Tile 900gr Code: HCB0801

Diamond hole saw suitable for use on natural stone and brick.

Diamond hole saw suitable for use on natural stone and brick.

See full description See full description
Product report

Description

Description

Diamond hole saw suitable for use on natural stone and brick.

Features

  • SDS plus
  • Thread M22
  • Diameter (mm): 80
  • Guide length (mm): 110
  • Number of teeth: 10

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
HCB0801

Dimensions

Type
Diamond Crown Threading

Type

Diamond Crown Threading
The drill bit features a cutting surface toothed like a crown with diamond grit on the top.
SDS
Yes

SDS

Slots with better performance in rotational impact compared to the rest.
Wet Cutting
No
Dry Cutting
No
Core Drill
No

Core Drill

It fits into perforated drills and is suitable for opening circular holes in building materials (e.g. concrete, cement).
Carbide
No

Carbide

Carbide is one of the hardest and most wear-resistant metals. It resists wear, impacts, distortion, high temperatures, corrosion, and high pressures, and is used for tasks with the hardest materials.
HSS
No

HSS

Made of reinforced steel that provides strength and makes it resistant to high temperatures.
Pieces
1 pcs
Diameter
80 mm

Drilling Material

Wood
No
Metal
No
Concrete
Yes
Brick
Yes
Tile
Yes
Plastic
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (25)

Reviews

4.6
25
4.6
Review this product
  1. 18
  2. 5
  3. 2
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • rinohiberna
    4
    rinohiberna

    Verified purchase

    This review is about the diameter: 65 mm

    very good hole saw, the only good thing is that the auger screw can be unscrewed and I already lost one in a double wall, luckily I found one that fit

    Translated from Greek ·
    Did you find this review helpful?
  • Michalis_Fyrogenis
    5
    2 out of 2 members found this review helpful
    Michalis_Fyrogenis

    Verified purchase

    This review is about the diameter: 65 mm

    Without hammering and with a little patience, I drilled through a balcony, 20 centimeters of concrete, and two pieces of rebar, one 10 mm and the other from mesh.
    I got my job done and the core bit was not damaged.
    A long centering rod and a medium-weight SDS rotary hammer are essential if you want it for concrete.
    For brick, you can do the job with any SDS drill.

    Translated from Greek ·
    Did you find this review helpful?
  • stevetheo
    5
    stevetheo

    Verified purchase

    I drilled through plaster and brick extremely easily and quickly. I haven't tried it on concrete to have an opinion.

    Translated from Greek ·
    Did you find this review helpful?
  • zacxanthi
    5
    1 out of 1 members found this review helpful
    zacxanthi

    Verified purchase

    This review is about the diameter: 65 mm

    I got it for drilling a hole in a brick to install a plug and a bolt... very good...

    For amateur use in brick and cement, very good...

    I haven't tried it on concrete with iron inside..

    Translated from Greek ·
    Did you find this review helpful?
  • pantel.george
    3
    3 out of 8 members found this review helpful
    pantel.george
    This review is about the diameter: 65 mm

    For its price and for drilling into bricks, it is good. However, if you are a professional, simply not. As soon as it encounters iron, one tooth goes away. I have a DeWalt one for 15 years and it has cut several - but small - pieces of iron by mistake. Of course, I had bought it for 120€.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    tsairidis1978

    Verified purchase

    Amazing quality, drilled through a concrete slab easily.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    artisventus

    Verified purchase

    This review is about the diameter: 100 mm

    It easily pierced through triple brick (for thick walls, the extension is needed).

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Avraam_Xanthopoulos

    Verified purchase

    Very good for its price

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    pantelis_z

    Verified purchase

    This review is about the diameter: 100 mm

    I opened a hole in the attic floor, made of concrete, 12 centimeters relatively easily.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    papayan

    Verified purchase

    This review is about the diameter: 65 mm

    very good value for money

    Translated from Greek ·
    Did you find this review helpful?
  • 3
    1 out of 1 members found this review helpful
    RXLOVER

    Verified purchase

    For bricks, it is good, but for (non-reinforced) cement, it takes a long time.

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    roronoa_zoro7462

    Verified purchase

    This review is about the diameter: 65 mm

  • 5
    Kyriazis_Nikolaos

    Verified purchase

    This review is about the diameter: 100 mm

  • 4
    ilias_sti

    Verified purchase

    This review is about the diameter: 65 mm

  • 5
    leskal

    Verified purchase

  • 5
    Sotos_K45

    Verified purchase

    This review is about the diameter: 65 mm

  • 5
    Stathis_CHristou

    Verified purchase

    This review is about the diameter: 100 mm

  • 5
    apostolos3105

    Verified purchase

    This review is about the diameter: 100 mm

  • 5
    titonidiseinaitrela

    Verified purchase

    This review is about the diameter: 65 mm

  • 5
    lekatsasspiros

    Verified purchase

  • 4
    politidism

    Verified purchase

  • 5
    GiorgosΜοι

    Verified purchase

    This review is about the diameter: 100 mm

  • 4
    jimjameson555

    Verified purchase

  • 5
    geustathiou1603

    Verified purchase

  • 5
    Jose_Makrionitis

    Verified purchase

    This review is about the diameter: 65 mm

  • rinohiberna
    4
    rinohiberna

    very good hole saw, the only good thing is that the auger screw can be unscrewed and I already lost one in a double wall, luckily I found one that fit

    Translated from Greek ·
    0
  • Michalis_Fyrogenis
    5
    Michalis_Fyrogenis

    Without hammering and with a little patience, I drilled through a balcony, 20 centimeters of concrete, and two pieces of rebar, one 10 mm and the other from mesh.
    I got my job done and the core bit was not damaged.
    A long centering rod and a medium-weight SDS rotary hammer are essential if you want it for concrete.
    For brick, you can do the job with any SDS drill.

    Translated from Greek ·
    2
  • stevetheo
    5
    stevetheo

    I drilled through plaster and brick extremely easily and quickly. I haven't tried it on concrete to have an opinion.

    Translated from Greek ·
    0
  • zacxanthi
    5
    zacxanthi

    I got it for drilling a hole in a brick to install a plug and a bolt... very good...

    For amateur use in brick and cement, very good...

    I haven't tried it on concrete with iron inside..

    Translated from Greek ·
    1
  • pantel.george
    3
    pantel.george

    For its price and for drilling into bricks, it is good. However, if you are a professional, simply not. As soon as it encounters iron, one tooth goes away. I have a DeWalt one for 15 years and it has cut several - but small - pieces of iron by mistake. Of course, I had bought it for 120€.

    Translated from Greek ·
    3
  • See all

Description & Specifications

Diamond hole saw suitable for use on natural stone and brick.

Features

  • SDS plus
  • Thread M22
  • Diameter (mm): 80
  • Guide length (mm): 110
  • Number of teeth: 10

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
HCB0801

Dimensions

Type
Diamond Crown Threading

Type

Diamond Crown Threading
The drill bit features a cutting surface toothed like a crown with diamond grit on the top.
SDS
Yes

SDS

Slots with better performance in rotational impact compared to the rest.
Wet Cutting
No
Dry Cutting
No
Core Drill
No

Core Drill

It fits into perforated drills and is suitable for opening circular holes in building materials (e.g. concrete, cement).
Carbide
No

Carbide

Carbide is one of the hardest and most wear-resistant metals. It resists wear, impacts, distortion, high temperatures, corrosion, and high pressures, and is used for tasks with the hardest materials.
HSS
No

HSS

Made of reinforced steel that provides strength and makes it resistant to high temperatures.
Pieces
1 pcs
Diameter
80 mm

Drilling Material

Wood
No
Metal
No
Concrete
Yes
Brick
Yes
Tile
Yes
Plastic
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (25)

4.6
25
4.6
Review this product
  1. 18
  2. 5
  3. 2
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • rinohiberna
    4
    rinohiberna

    Verified purchase

    This review is about the diameter: 65 mm

    very good hole saw, the only good thing is that the auger screw can be unscrewed and I already lost one in a double wall, luckily I found one that fit

    Translated from Greek ·
    Did you find this review helpful?
  • Michalis_Fyrogenis
    5
    2 out of 2 members found this review helpful
    Michalis_Fyrogenis

    Verified purchase

    This review is about the diameter: 65 mm

    Without hammering and with a little patience, I drilled through a balcony, 20 centimeters of concrete, and two pieces of rebar, one 10 mm and the other from mesh.
    I got my job done and the core bit was not damaged.
    A long centering rod and a medium-weight SDS rotary hammer are essential if you want it for concrete.
    For brick, you can do the job with any SDS drill.

    Translated from Greek ·
    Did you find this review helpful?
  • stevetheo
    5
    stevetheo

    Verified purchase

    I drilled through plaster and brick extremely easily and quickly. I haven't tried it on concrete to have an opinion.

    Translated from Greek ·
    Did you find this review helpful?
  • zacxanthi
    5
    1 out of 1 members found this review helpful
    zacxanthi

    Verified purchase

    This review is about the diameter: 65 mm

    I got it for drilling a hole in a brick to install a plug and a bolt... very good...

    For amateur use in brick and cement, very good...

    I haven't tried it on concrete with iron inside..

    Translated from Greek ·
    Did you find this review helpful?
  • pantel.george
    3
    3 out of 8 members found this review helpful
    pantel.george
    This review is about the diameter: 65 mm

    For its price and for drilling into bricks, it is good. However, if you are a professional, simply not. As soon as it encounters iron, one tooth goes away. I have a DeWalt one for 15 years and it has cut several - but small - pieces of iron by mistake. Of course, I had bought it for 120€.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    tsairidis1978

    Verified purchase

    Amazing quality, drilled through a concrete slab easily.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    artisventus

    Verified purchase

    This review is about the diameter: 100 mm

    It easily pierced through triple brick (for thick walls, the extension is needed).

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Avraam_Xanthopoulos

    Verified purchase

    Very good for its price

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    pantelis_z

    Verified purchase

    This review is about the diameter: 100 mm

    I opened a hole in the attic floor, made of concrete, 12 centimeters relatively easily.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    papayan

    Verified purchase

    This review is about the diameter: 65 mm

    very good value for money

    Translated from Greek ·
    Did you find this review helpful?
  • 3
    1 out of 1 members found this review helpful
    RXLOVER

    Verified purchase

    For bricks, it is good, but for (non-reinforced) cement, it takes a long time.

    Translated from Greek ·
    Did you find this review helpful?
  • 4
    roronoa_zoro7462

    Verified purchase

    This review is about the diameter: 65 mm

  • 5
    Kyriazis_Nikolaos

    Verified purchase

    This review is about the diameter: 100 mm

  • 4
    ilias_sti

    Verified purchase

    This review is about the diameter: 65 mm

  • 5
    leskal

    Verified purchase

  • 5
    Sotos_K45

    Verified purchase

    This review is about the diameter: 65 mm

  • 5
    Stathis_CHristou

    Verified purchase

    This review is about the diameter: 100 mm

  • 5
    apostolos3105

    Verified purchase

    This review is about the diameter: 100 mm

  • 5
    titonidiseinaitrela

    Verified purchase

    This review is about the diameter: 65 mm

  • 5
    lekatsasspiros

    Verified purchase

  • 4
    politidism

    Verified purchase

  • 5
    GiorgosΜοι

    Verified purchase

    This review is about the diameter: 100 mm

  • 4
    jimjameson555

    Verified purchase

  • 5
    geustathiou1603

    Verified purchase

  • 5
    Jose_Makrionitis

    Verified purchase

    This review is about the diameter: 65 mm

  • rinohiberna
    4
    rinohiberna

    very good hole saw, the only good thing is that the auger screw can be unscrewed and I already lost one in a double wall, luckily I found one that fit

    Translated from Greek ·
    0
  • Michalis_Fyrogenis
    5
    Michalis_Fyrogenis

    Without hammering and with a little patience, I drilled through a balcony, 20 centimeters of concrete, and two pieces of rebar, one 10 mm and the other from mesh.
    I got my job done and the core bit was not damaged.
    A long centering rod and a medium-weight SDS rotary hammer are essential if you want it for concrete.
    For brick, you can do the job with any SDS drill.

    Translated from Greek ·
    2
  • stevetheo
    5
    stevetheo

    I drilled through plaster and brick extremely easily and quickly. I haven't tried it on concrete to have an opinion.

    Translated from Greek ·
    0
  • zacxanthi
    5
    zacxanthi

    I got it for drilling a hole in a brick to install a plug and a bolt... very good...

    For amateur use in brick and cement, very good...

    I haven't tried it on concrete with iron inside..

    Translated from Greek ·
    1
  • pantel.george
    3
    pantel.george

    For its price and for drilling into bricks, it is good. However, if you are a professional, simply not. As soon as it encounters iron, one tooth goes away. I have a DeWalt one for 15 years and it has cut several - but small - pieces of iron by mistake. Of course, I had bought it for 120€.

    Translated from Greek ·
    3
  • See all
16,50 €
14,00 €   shipping cost