For such an expensive keyboard - the esc key didn't work from the first day !!!
I had to use a contact cleaner to get it to start working !!! and not just once.
Now, months later, the blue color burned out on one of the keys... I found another key that the blue LED doesn't work on !!! 2 LEDs in total no longer work correctly !!!
The software loses the settings that you save and then doesn't restore them from your account.
I couldn't properly set up a macro no matter what...
There is a strong white light at the back of the USB that bothers you and you can't turn it off.
It doesn't have dual action to perform actions based on the depth of the press, even though it can detect the depth of the press.
I also bought those plastic inserts that you put inside each key for less noise, and I lost a lot of actuation - which is not present in all keys, and also not the same in every key - meaning some keys are more sensitive, others are less.
The OLED screen that constantly displays "steelseries" and doesn't change has left a mark - as if they didn't notice that either.
What can I say - so much money and so many problems.
----
and a third LED doesn't work... the policy to replace it is a joke...
----
Let me update you on my pain because the new one they replaced it with broke the same way.
----
To replace the broken one, it took 3 months - after they made me wait a month with "what ifs" and "maybes," they made me buy a new one from their store - which was out of stock and I had to wait there as well until it became available again. They sent it to me and asked me to destroy the old one by cutting the cables and send proof that I did it. If I made any mistakes during this process (e.g. the serial number wasn't visible, I didn't destroy it correctly, I don't know what else), I wouldn't get a refund.
After the process was completed, which took almost 3 months - the new keyboard, after a few months, the color on one key broke again - truly unbelievable! I'll say it again, truly unbelievable for LEDs to break -
And I should note that I take great care of it, meaning I don't have the brightness at maximum, the screen that has been installed also goes into save mode after a while - because in the previous one, the screen also had the imprint of the steel series logo.
Also, apart from that - the software doesn't have enough tricks that they could have added because of the special keys, for example, double actuation, where you press it, release it for a bit, and press it again and it recognizes the click, and other things that I have seen in other keyboards.
I should also mention that the keys that lost their color were not the ones I pressed the most, I didn't press one of them at all.
I also removed the rubber rings in case they were the problem. Nope - they are simply defective by nature when it comes to color and LEDs.
-------
Oh, and I shouldn't forget to mention, if you put an O-ring, you lose half of the travel distance that it detects because it doesn't go all the way down...
-------
Also, it's not analog - even though the program has the capability, they don't make it analog.... wasted money -
Για ένα τόσο ακριβό πληκτρολόγιο – το esc δεν δούλευε από την πρώτη μέρα !!!
Έπρεπε να του ρίξω ένα καθαριστικό επαφών για να ξεκινήσει να δουλεύει !!! και όχι μόνο μια φορά.
Τώρα μερικούς μήνες μετά μου κάηκε το μπλέ χρώμα σε ένα από τα κουμπιά… ψάχνοντας το βρήκα ακόμη ένα πλήκτρο που δεν δουλεύει το blue led !!! 2 led συνολικά δεν δουλεύουν πλέον σωστα !!!
Το software χάνει τις ρυθμίσεις που του σώνεις και μετά δεν τις ξαναφέρνει από τον λογαριασμό σου.
Δεν μπορούσα να βάλω σωστά κάποιο macro με τίποτα…
Πίσω του στο usb έχει ένα δυνατό άσπρο φως που σε ενοχλεί και που δεν μπορείς να κλείσεις.
Δεν έχει διπλή ενέργεια για να κάνει πράγματα ανάλογα το βάθος πατήματος, παρόλο που μπορεί να δει το βάθος πατήματος.
Αγόρασα και αυτά τα πλαστικά που βάζεις μέσα σε κάθε πλήκτρο για λιγότερο θόρυβο, και έχασα πάρα πολύ από το actuation – το οποίο δεν είναι σε όλα τα πλήκτρα, και επίσης δεν είναι το ίδιο σε κάθε πλήκτρο – δηλαδή μερικά πλήκτρα είναι περισσότερο ευαίσθητα, άλλα είναι λιγότερο.
Η δεν οθόνη oled που γράφει συνέχεια steelseries και δεν αλλάζει, έχει αφήσει στίγμα την λέξη – αν είναι δυνατόν δεν το προσέξανε ούτε αυτό.
Τι να πω – τόσα χρήματα και τόσα προβλήματα.
----
και τρίτο LED δεν δουλεύει ... η πολιτική για να το αλλάξω ειναι για κλάματα...
----
Update να σας πω τον πόνο μου γιατί και το νέο που μου αντικαταστήσανε χάλασε το ίδιο.
----
Για να μου το αντικαταστήσουν το χαλασμένο πρέπει να πέρασαν 3 μήνες – αφού με παίδεψαν ένα μήνα με τα μήπως και τα αν, με βάλανε και αγόρασα ένα νέο από το μαγαζί τους – στο οποίο ήταν σε έλλειψη και περίμενα και εκεί μέχρι να γυρίσει πάλι σε διαθέσιμο. Μου το στείλανε και μου ζητήσανε να καταστρέψω το παλιό κόβοντας τα καλώδια και να στείλω αποδείξεις ότι το έκανα. Σε όλη αυτήν την διαδικασία αν έκανα λάθος (πχ δεν φαινόταν το sn, δεν το κατέστρεφα σωστά, δεν ξέρω και εγώ τι, δεν θα έπαιρνα πίσω τα χρήματα.
Αφού ολοκληρώθηκε η διαδικασία που πήρε κοντά στους 3 μήνες – το νέο πληκτρολόγιο μετά από μερικούς μήνες πάλι χάλασε το χρώμα σε ένα πλήκτρο – πραγματικά απίστευτο ! Θα το ξαναπώ, πραγματικά απίστευτο για led να χαλάνε –
Και να σημειώσω πως το προστατεύω πολύ, δηλαδή δεν το έχω πλήρη φωτεινό να καίγονται , κλείνει μετά από λίγο η οθόνη που έχει μπαίνει και αυτή σε save mode – γιατί στο προηγούμενο και η οθόνη είχε πλέον αποτύπωμα του λογοτύπου του steel series.
Επίσης πέρα από αυτό – δεν έχει αρκετά κόλπα το λογισμικό που θα μπορούσαν να βάλουν λόγο των ειδικών πλήκτρων, πχ διπλό actuation, να το πατάς, να το αφήνεις λίγο και να το πατάς ξανά και να καταλαβαίνει το click και άλλα τέτοια που τα έχω δει σε άλλα πληκτρολόγια.
Ακόμη να πω πως τα πλήκτρα που χάλασαν τα χρώματα δεν ήταν αυτά που πατάω περισσότερο, το ένα δεν το πάταγα καθόλου.
Επίσης έβγαλα και τα λαστιχάκια μπας και φταίγανε αυτά. Μπα – είναι απλά ελαττωματικά από την φύση τους όσον αφορά το χρώμα και τα led.
-------
ααα και να μην ξεχάσω να αναφέρω, αν βάλει o-ring χάνεις την μισή διαδρομή που αντιλαμβάνεται γιατί δεν πάει κάτω κάτω...
-------
επίσεις δεν είναι αναλογικό - ενώ έχει την δυνατότητα το πρόγραμμα δεν το φτιάχνουν να ειναι αναλογικό.... πεταμένα χρήματα -