Skroutz.mt

MikroTik wAP ac LTE kit Access Point Wi‑Fi 5 Dual Band (2.4 & 5GHz)
Access Points

MikroTik wAP ac LTE kit Access Point Wi‑Fi 5 Dual Band (2.4 & 5GHz)

The MikroTik wAP ac LTE kit access point combines dual-band 2.4 and 5 GHz wireless connectivity with a CAT6 LTE modem and Micro SIM slot. LTE CAT6 supports carrier aggregation and download speeds of...

The MikroTik wAP ac LTE kit access point combines dual-band 2.4 and 5 GHz wireless connectivity with a CAT6 LTE modem and Micro SIM slot. LTE CAT6 supports carrier aggregation and download speeds of up to 300 Mbps. The two Gigabit Ethernet ports allow it to be used as a wired router with an LTE backup connection.

It runs RouterOS and features a quad-core...

See full description See full description

Top specs

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Dual Band (2.4 & 5GHz)

    They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.

  • Wi-Fi Generation

    Wi‑Fi 5

    The most widespread Wi-Fi standard, significantly faster than Wi-Fi 4. Wi-Fi 5 can meet the needs of most users for now. The next generation (Wi-Fi 6) began to be released in 2019 and offers the ability to connect many more devices to accommodate the increasing number of smart devices in a home.

    Each newer generation is compatible with devices that support a previous one.
  • See all
166 11 €
Lowest price '26
Delivery Wed, 18 Nov - Fri, 20 Nov
14,00 €   shipping cost
Sent from Greece
From ΝΕTCORE
Greece
4 pieces
See Networking on the page of ΝΕTCORE

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The MikroTik wAP ac LTE kit access point combines dual-band 2.4 and 5 GHz wireless connectivity with a CAT6 LTE modem and Micro SIM slot. LTE CAT6 supports carrier aggregation and download speeds of up to 300 Mbps. The two Gigabit Ethernet ports allow it to be used as a wired router with an LTE backup connection.

It runs RouterOS and features a quad-core IPQ-4018 processor, 128 MB of RAM and 16 MB of FLASH storage. It can be mounted on a wall, ceiling or pole and operates at temperatures from -30 °C to +60 °C.

  • Device type: Access point
  • Wi-Fi generation: Wi-Fi 5
  • Frequency: Dual-band 2.4 and 5 GHz
  • Maximum WLAN speed: 1200 Mbps
  • Networking standards: IEEE 802.11a, 802.11 b/g/n, 802.11ac
  • Ethernet ports: 2
  • LAN speed: 1000 Mbps
  • PoE support: Yes
  • Maximum antenna gain: 2.5 dBi
  • LTE modem: CAT6
  • LTE download speed: Up to 300 Mbps
  • SIM slot: Micro SIM
  • Processor: IPQ-4018, 4 cores, 716 MHz
  • Architecture: 32-bit ARM
  • Operating system: RouterOS
  • RouterOS license: Level 4
  • RAM: 128 MB
  • Storage: 16 MB FLASH
  • Mounting: Indoor, wall, ceiling or pole
  • Operating temperature: From -30 °C to +60 °C
  • Packaging: Single kit

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
1200 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 5

Wi-Fi Generation

Wi‑Fi 5

The most widespread Wi-Fi standard, significantly faster than Wi-Fi 4. Wi-Fi 5 can meet the needs of most users for now. The next generation (Wi-Fi 6) began to be released in 2019 and offers the ability to connect many more devices to accommodate the increasing number of smart devices in a home.

Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n, 802.11ac
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
2.5 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Ethernet Ports
2

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
Yes

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The MikroTik wAP ac LTE kit access point combines dual-band 2.4 and 5 GHz wireless connectivity with a CAT6 LTE modem and Micro SIM slot. LTE CAT6 supports carrier aggregation and download speeds of up to 300 Mbps. The two Gigabit Ethernet ports allow it to be used as a wired router with an LTE backup connection.

It runs RouterOS and features a quad-core IPQ-4018 processor, 128 MB of RAM and 16 MB of FLASH storage. It can be mounted on a wall, ceiling or pole and operates at temperatures from -30 °C to +60 °C.

  • Device type: Access point
  • Wi-Fi generation: Wi-Fi 5
  • Frequency: Dual-band 2.4 and 5 GHz
  • Maximum WLAN speed: 1200 Mbps
  • Networking standards: IEEE 802.11a, 802.11 b/g/n, 802.11ac
  • Ethernet ports: 2
  • LAN speed: 1000 Mbps
  • PoE support: Yes
  • Maximum antenna gain: 2.5 dBi
  • LTE modem: CAT6
  • LTE download speed: Up to 300 Mbps
  • SIM slot: Micro SIM
  • Processor: IPQ-4018, 4 cores, 716 MHz
  • Architecture: 32-bit ARM
  • Operating system: RouterOS
  • RouterOS license: Level 4
  • RAM: 128 MB
  • Storage: 16 MB FLASH
  • Mounting: Indoor, wall, ceiling or pole
  • Operating temperature: From -30 °C to +60 °C
  • Packaging: Single kit

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
1200 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 5

Wi-Fi Generation

Wi‑Fi 5

The most widespread Wi-Fi standard, significantly faster than Wi-Fi 4. Wi-Fi 5 can meet the needs of most users for now. The next generation (Wi-Fi 6) began to be released in 2019 and offers the ability to connect many more devices to accommodate the increasing number of smart devices in a home.

Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n, 802.11ac
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
2.5 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Ethernet Ports
2

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
Yes

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

166,11 €
14,00 €   shipping cost