Quite good.
It needs adjustment, of course.
And the most important adjustment is NOT the one that most people think, which is the "blade" for peeling. This simply determines how thick the peel will be cut.
The most important adjustment is the screw at the base of the peeling arm.
The more you tighten it, the greater the distance between the arm and the apple.
In other words, you tighten it for larger apples, and loosen it for smaller ones.
If you put a large apple and the screw is completely loosened, it presses it too much and doesn't move forward, resulting in the apple breaking at the point where it is pinned.
Of course, it doesn't need adjustment every time.
If you "calibrate" it once with a regular-sized apple, then you won't have any issues with slightly larger or smaller ones.
Unless you try to put a peanut or something.
TIR: Don't try to remove the cylinder with the seeds that stays on top by hand. When you pull back the lever, it will hit against the ring and come out.
Αρκετά καλό.
Θέλει ρύθμιση φυσικά.
Και η πιο σημαντική ρύθμιση ΔΕΝ είναι αυτή που νομίζουν οι περισσότεροι, δηλαδή της "λεπίδας" του ξεφλουδίσματος. Αυτή καθορίζει απλά το πόσο παχιά θα κόψει τη φλούδα.
Η πιό σημαντική ρύθμιση είναι η βίδα στην βάση του βραχίονα ξεφλουδίσματος.
Όσο τη βιδώνες τόσο μεγαλύτερη απόσταση έχει ο βραχίονας από το μήλο.
Με λίγα λόγια, βιδώνεις για μεγάλα μήλα, ξεβιδώνεις για μικρά.
Αν βάλεις ένα μεγάλο μήλο και η βίδα είναι τέρμα ξεβίδωτη, το πιέζει πάρα πολύ και δεν προχωράει με αποτέλεσμα να διαλύεται το μήλο στο σημείο που είναι καρφωμένο.
Δεν χρειάζεται βέβαια ρύθμιση κάθε φορά.
Αν το "καλιμπράρεις" μια φορά με ένα κανονικού μεγέθους μήλο, μετά δεν έχεις θέμα με τα λίγο μεγαλύτερα ή μικρότερα.
Εκτός αν πας να βάλεις κανένα φυρίκι ξερω γω.
ΤΙΡ: Τον κύλινδρο με τα κουκούτσια που μένει στο τέλος επάνω μην πας να τον βγάλεις με το χέρι. Την ώρα που θα τραβήξεις πίσω τον μοχλό θα βρει κόντρα στο δαχτυλίδι και θα βγει.