Skroutz.mt

GET 55-125 Professional Electric Eccentric Sander 125mm Electric 550W with Speed Control and with Suction System 0601257001
Sanders

GET 55-125 Professional Electric Eccentric Sander 125mm Electric 550W with Speed Control and with Suction System 0601257001

The Bosch GET 55-125 Professional random orbital sander is used for coarse and intermediate sanding, paint removal, finishing and polishing. Its multi-hole sanding pad accepts sanding sheets...

The Bosch GET 55-125 Professional random orbital sander is used for coarse and intermediate sanding, paint removal, finishing and polishing. Its multi-hole sanding pad accepts sanding sheets regardless of the number of holes and is compatible with Bosch’s Click & Clean dust extraction system. The 550 W motor and direct drive of the backing pad provide up to...

See full description See full description

Top specs

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    1.75

    Very fine sanding, sensitive materials, finishing

  • Oscillations

    • High number of strokes → more intense and faster sanding
    • Low number → gentler, suitable for sensitive surfaces

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Weight (Net) 2400 gr
  • See all

Carrying case

  1. Hard Case

    from 479,00 €

  2. Without

    from 787,90 €

479 00 €
Delivery by Tue, 10 Nov
23,00 €   shipping cost
Sent from Greece
From Xristou 4.9 (43)
4.9 (43 reviews)
Greece
1 piece
See Power Tools on the page of Xristou

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Bosch GET 55-125 Professional random orbital sander is used for coarse and intermediate sanding, paint removal, finishing and polishing. Its multi-hole sanding pad accepts sanding sheets regardless of the number of holes and is compatible with Bosch’s Click & Clean dust extraction system. The 550 W motor and direct drive of the backing pad provide up to 27% greater material removal performance.

The ergonomic palm rest and handle with an 18 cm circumference help you control the tool. The sander can be used on wood, veneer, paint, filler, mineral materials and acrylic materials.

  • Power supply: Mains-powered
  • Power: 550 W
  • Voltage: 230 V
  • Sanding pad diameter: 125 mm
  • Speed: 3,300–7,800 min⁻¹
  • Orbital stroke rate: 6,600–15,600 min⁻¹
  • Sanding pad speed: 200–480 min⁻¹
  • Eccentricity: 1.75 mm
  • Orbit diameter: 3.5 mm
  • Sanding sheet attachment: Hook and loop
  • Variable speed control: Yes
  • Constant speed: Yes
  • Dust extraction system: Bosch Click & Clean
  • Edge protection: Yes
  • Weight: 2.4 kg
  • Tool dimensions: 147 × 349 × 140 mm (width × length × height)
  • Sound power level: 97 dB(A)
  • Package contents: L-BOXX 238, 125 mm sanding pad, 3 M480 Best for Wood and Paint sanding sheets (grits 80, 120 and 180), 125 mm protection ring, 125 mm dust extraction adapter, auxiliary handle with screw and Allen key

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
1.75 mm

Eccentricity: 1.75

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Vibration (m/s²)
6
Net Weight
2400 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
550 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
7800 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
97 dB
Pulses
15600 opm

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Hard Case
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Bosch GET 55-125 Professional random orbital sander is used for coarse and intermediate sanding, paint removal, finishing and polishing. Its multi-hole sanding pad accepts sanding sheets regardless of the number of holes and is compatible with Bosch’s Click & Clean dust extraction system. The 550 W motor and direct drive of the backing pad provide up to 27% greater material removal performance.

The ergonomic palm rest and handle with an 18 cm circumference help you control the tool. The sander can be used on wood, veneer, paint, filler, mineral materials and acrylic materials.

  • Power supply: Mains-powered
  • Power: 550 W
  • Voltage: 230 V
  • Sanding pad diameter: 125 mm
  • Speed: 3,300–7,800 min⁻¹
  • Orbital stroke rate: 6,600–15,600 min⁻¹
  • Sanding pad speed: 200–480 min⁻¹
  • Eccentricity: 1.75 mm
  • Orbit diameter: 3.5 mm
  • Sanding sheet attachment: Hook and loop
  • Variable speed control: Yes
  • Constant speed: Yes
  • Dust extraction system: Bosch Click & Clean
  • Edge protection: Yes
  • Weight: 2.4 kg
  • Tool dimensions: 147 × 349 × 140 mm (width × length × height)
  • Sound power level: 97 dB(A)
  • Package contents: L-BOXX 238, 125 mm sanding pad, 3 M480 Best for Wood and Paint sanding sheets (grits 80, 120 and 180), 125 mm protection ring, 125 mm dust extraction adapter, auxiliary handle with screw and Allen key

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
1.75 mm

Eccentricity: 1.75

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Vibration (m/s²)
6
Net Weight
2400 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
550 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
7800 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
97 dB
Pulses
15600 opm

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Hard Case
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

479,00 €
23,00 €   shipping cost
Bosch