Skroutz.mt

Plus KDM 20 Electric Surface Water Pump Centrifugal with Automatic Suction 2hp Single-Phase
Surface Water Pumps

Plus KDM 20 Electric Surface Water Pump Centrifugal with Automatic Suction 2hp Single-Phase Code: 230116

The Plus KDM 20 surface centrifugal pump is a two-stage model suitable for pumping water to a head of up to 54 m. It has a cast-iron body and a bronze impeller, with a suction lift of up to 8 m.

  • ...

The Plus KDM 20 surface centrifugal pump is a two-stage model suitable for pumping water to a head of up to 54 m. It has a cast-iron body and a bronze impeller, with a suction lift of up to 8 m.

  • Type: Two-stage centrifugal
  • Power supply: Electric
  • Power: 1500 W
  • Horsepower: 2 hp
  • Voltage: Single-phase, 230 V
  • Installation: Horizontal
  • Head: Up to 54 m
  • Flow rate:...
See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.

  • Centrifugal

    Pumps with impellers that enhance water flow.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all

Horsepower

  1. 1.5 hp

    from 170,90 €

  2. 2 hp

    from 193,40 €

Manometric head

  1. 45 m

    from 170,90 €

  2. 54 m

    from 193,40 €

193 40 €
Delivery Fri, 06 Nov - Tue, 10 Nov
47,00 €   shipping cost
Sent from Greece
From Istikoglou
Greece
See Water Pumps on the page of Istikoglou

Learn more about invoicing
Review the product
Product report

Description

Description

The Plus KDM 20 surface centrifugal pump is a two-stage model suitable for pumping water to a head of up to 54 m. It has a cast-iron body and a bronze impeller, with a suction lift of up to 8 m.

  • Type: Two-stage centrifugal
  • Power supply: Electric
  • Power: 1500 W
  • Horsepower: 2 hp
  • Voltage: Single-phase, 230 V
  • Installation: Horizontal
  • Head: Up to 54 m
  • Flow rate: Up to 54 m³/h
  • Suction lift: Up to 8 m
  • Pump body: Cast iron
  • Impeller: Bronze
  • Inlet port: 1 1/2″
  • Outlet port: 1″
  • Pumped liquid temperature: From -10 °C to 60 °C
  • Ambient temperature: Up to 40 °C

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
230116

Main Specifications

Type
Double Stage

Type

Double Stage
They have dual propellers that work together to pump the relevant process fluids. They are adjustable to send water either with more pressure or in a larger volume.
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
2 hp
Power
1500 W
Flow Rate
54 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
54 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Plus KDM 20 surface centrifugal pump is a two-stage model suitable for pumping water to a head of up to 54 m. It has a cast-iron body and a bronze impeller, with a suction lift of up to 8 m.

  • Type: Two-stage centrifugal
  • Power supply: Electric
  • Power: 1500 W
  • Horsepower: 2 hp
  • Voltage: Single-phase, 230 V
  • Installation: Horizontal
  • Head: Up to 54 m
  • Flow rate: Up to 54 m³/h
  • Suction lift: Up to 8 m
  • Pump body: Cast iron
  • Impeller: Bronze
  • Inlet port: 1 1/2″
  • Outlet port: 1″
  • Pumped liquid temperature: From -10 °C to 60 °C
  • Ambient temperature: Up to 40 °C

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
230116

Main Specifications

Type
Double Stage

Type

Double Stage
They have dual propellers that work together to pump the relevant process fluids. They are adjustable to send water either with more pressure or in a larger volume.
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
2 hp
Power
1500 W
Flow Rate
54 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
54 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

193,40 €
47,00 €   shipping cost