The forced circulation gas instant water heater by Ariston can offer the best performance thanks to the highest quality standard that ensures over 90% efficiency.

The external installation combined with the forced flow of exhaust gases of the product guarantees maximum safety. The forced flow exhaust gas device for internal installation eliminates any possibility of exhaust gas leakage inside the residence, thanks to the fan that ensures the evacuation of the chimney's exhaust gases.

Thanks to the NTC sensor, the water heater will adjust the burner according to the water flow fluctuation to ensure a constant temperature maximizing comfort.

Easy to use with a large screen, clear information.

Can be connected to a system with solar products from Ariston.

• Compact design with reduced dimensions for easy fitting in your home.
• Shallow depth for space-saving and easy installation in your home.

• Low NOx: compliance with ErP directive: 26/9/2018
• Extremely compact: only 16.5cm depth
• Comfort: Electronic temperature control, bath function.
• Performance and energy saving: High efficiency, thermostatic valve for solar system integration, electronic ignition with up to 25% gas savings compared to older generations.
• Quality: Overheating protection, flame safety sensor, water overpressure valve.

It is central and can be used either as the main option for heating the water in your home, or as a supplementary. It can provide hot water throughout the house for your daily needs, as long as there are suitable pipes for the distribution of hot water. This may potentially result in heat and energy losses due to the distance.

The instant water heater is a type of water heater that heats water in real-time. It only heats the water that passes through it at that moment. There is no hot water storage tank. This has many advantages, such as energy savings, since only the water that is used is heated, and longer lifespan, as there is no water tank and no accumulation of salts on the resistance and other components.

It operates with liquefied petroleum gas (LPG), and no electrical installation is required.

The instant water heater has a cold water inlet pipe, which passes through the resistance, heats up, and exits through the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is the pressure of the cold water inlet must not be too low.

The water temperature is regulated by a thermostat, so it does not exceed a maximum value. The temperatures that the hot water reaches are preset so that one can use the hot water directly, without needing to mix it with cold water.

The maximum temperature that can be reached for hot water production is 65 °C, while the maximum water flow rate reaches up to 11 liters per minute. Indicatively, 38-42 °C degrees are standard for shower use.

• It is small in size and does not take up much space.
• There are no energy losses, as only the water being used at that moment is heated. Therefore, we save on the electricity bill. In a traditional water heater, the hot water that is not used goes to waste.
• The hot water used in the instant water heater is used as is, without mixing with cold, as happens in a traditional water heater. Thus, we also save water, in addition to electricity.
• There is no need to wait for the water to heat up. As soon as we turn on the tap, hot water flows in a few seconds. The traditional water heater takes a few minutes, depending on its size.
• The hot water never runs out. As long as we have the tap open, we will have hot water.