Skroutz.mt

Bosch GET 75-150 Professional Electric Eccentric Sander 150mm Electric 750W with Speed Control and with Suction System 0601257100
Sanders

Bosch GET 75-150 Professional Electric Eccentric Sander 150mm Electric 750W with Speed Control and with Suction System 0601257100

Brand: Bosch

Type: Electric sander

Maximum Capacity: 750W

Oscillation Diameter: 4.5 mm

Weight: 2.6 kg

No-load Speed: 3300 - 7300 rpm

Sanding Plate Diameter: 150 mm

Electric sander GET 75-150 with...

Brand: Bosch

Type: Electric sander

Maximum Capacity: 750W

Oscillation Diameter: 4.5 mm

Weight: 2.6 kg

No-load Speed: 3300 - 7300 rpm

Sanding Plate Diameter: 150 mm

Electric sander GET 75-150 with excellent performance.

  • Ergonomic handle for optimal tool guidance.
  • Multi-perforated sanding surface compatible with all sanding sheets.
  • Capable 750 W motor with...
See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Soft Start

    Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    4.5

    Fast material removal, more aggressive sanding.

  • Oscillations

    • High number of strokes → more intense and faster sanding
    • Low number → gentler, suitable for sensitive surfaces

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Weight (Net) 2600 gr
  • See all
Product report

Description

Description

Brand: Bosch

Type: Electric sander

Maximum Capacity: 750W

Oscillation Diameter: 4.5 mm

Weight: 2.6 kg

No-load Speed: 3300 - 7300 rpm

Sanding Plate Diameter: 150 mm

Electric sander GET 75-150 with excellent performance.

  • Ergonomic handle for optimal tool guidance.
  • Multi-perforated sanding surface compatible with all sanding sheets.
  • Capable 750 W motor with active plate rotation for excellent efficiency.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
4.5 mm

Eccentricity: 4.5

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Fast material removal, more aggressive sanding.
Vibration (m/s²)
6.5
Net Weight
2600 gr
Weight (with Battery)
2600 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
750 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
7300 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
96 dB
Pulses
14600 opm

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
150 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

Brand: Bosch

Type: Electric sander

Maximum Capacity: 750W

Oscillation Diameter: 4.5 mm

Weight: 2.6 kg

No-load Speed: 3300 - 7300 rpm

Sanding Plate Diameter: 150 mm

Electric sander GET 75-150 with excellent performance.

  • Ergonomic handle for optimal tool guidance.
  • Multi-perforated sanding surface compatible with all sanding sheets.
  • Capable 750 W motor with active plate rotation for excellent efficiency.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
4.5 mm

Eccentricity: 4.5

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Fast material removal, more aggressive sanding.
Vibration (m/s²)
6.5
Net Weight
2600 gr
Weight (with Battery)
2600 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
750 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
7300 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
96 dB
Pulses
14600 opm

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
150 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
668,61 €
14,00 €   shipping cost