Skroutz.mt

FFG JET 750 Electric Surface Water Pump with Automatic Suction 0.75hp Single-Phase
Surface Water Pumps

FFG JET 750 Electric Surface Water Pump with Automatic Suction 0.75hp Single-Phase Code: 42925

The FFG JET 750 surface pump is designed for domestic water pumping and can draw water from a depth of up to 9 m. The motor features copper windings, while the SiC mechanical seal protects it from...

The FFG JET 750 surface pump is designed for domestic water pumping and can draw water from a depth of up to 9 m. The motor features copper windings, while the SiC mechanical seal protects it from water ingress. A brass impeller, stainless steel shaft and electrostatic paint finish complete its construction.

Its flow rate is 2.3 m³/h at 17 m, 1.5 m³/h at 32...

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The FFG JET 750 surface pump is designed for domestic water pumping and can draw water from a depth of up to 9 m. The motor features copper windings, while the SiC mechanical seal protects it from water ingress. A brass impeller, stainless steel shaft and electrostatic paint finish complete its construction.

Its flow rate is 2.3 m³/h at 17 m, 1.5 m³/h at 32 m, 0.9 m³/h at 39 m and 0.5 m³/h at 44 m.

  • Type: Self-priming
  • Use: Domestic
  • Installation: Horizontal
  • Rated voltage: 220–230 V / 50 Hz
  • Power supply: Single-phase electric
  • Rated power: 550 W / 0.75 hp
  • Input power: 750 W
  • Starting current: 3.7 A
  • Rotational speed: 2,850 rpm
  • Maximum flow rate: 2.7 m³/h
  • Maximum head: 46 m
  • Maximum pressure: 4.6 bar
  • Inlet connection: 1"
  • Outlet connection: 1"
  • Protection rating: IP44
  • Insulation class: B
  • Operation: Continuous (S1)
  • Weight: 12.15 kg
  • Package contents: 1 surface pump

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
42925

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
0.75 hp
Power
750 W
Flow Rate
45 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
46 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
4.6 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The FFG JET 750 surface pump is designed for domestic water pumping and can draw water from a depth of up to 9 m. The motor features copper windings, while the SiC mechanical seal protects it from water ingress. A brass impeller, stainless steel shaft and electrostatic paint finish complete its construction.

Its flow rate is 2.3 m³/h at 17 m, 1.5 m³/h at 32 m, 0.9 m³/h at 39 m and 0.5 m³/h at 44 m.

  • Type: Self-priming
  • Use: Domestic
  • Installation: Horizontal
  • Rated voltage: 220–230 V / 50 Hz
  • Power supply: Single-phase electric
  • Rated power: 550 W / 0.75 hp
  • Input power: 750 W
  • Starting current: 3.7 A
  • Rotational speed: 2,850 rpm
  • Maximum flow rate: 2.7 m³/h
  • Maximum head: 46 m
  • Maximum pressure: 4.6 bar
  • Inlet connection: 1"
  • Outlet connection: 1"
  • Protection rating: IP44
  • Insulation class: B
  • Operation: Continuous (S1)
  • Weight: 12.15 kg
  • Package contents: 1 surface pump

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
42925

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
0.75 hp
Power
750 W
Flow Rate
45 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
46 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
4.6 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

109,00 €
26,00 €   shipping cost