Skroutz.mt

Milwaukee FHSAG125XPDB-552X Grinder 125mm Battery Brushless 2x5.5Ah
Angle Grinders

Milwaukee FHSAG125XPDB-552X Grinder 125mm Battery Brushless 2x5.5Ah

Key features:

  • POWERSTATE brushless motor
  • RAPIDSTOP braking system
  • 125 mm disc diameter
  • 2 × 5.5 Ah batteries & charger

Tackle demanding cuts safely with the POWERSTATE motor and the ultra-fast RAPIDSTOP electronic brake.

See full description

Top specs

  • Maximum Disc Diameter

    From 115mm to 150mm, it satisfactorily covers most amateur and professional tasks. The cutting depth ranges from 30mm to 40mm. A smaller disc diameter means that the wheel will be more flexible for simple tasks (e.g. electrical, plumbing, or DIY projects).

    From 180mm and above, it concerns industrial applications that require a larger cutting/sanding surface. The cutting depth is from 70mm and above.
  • Number of Batteries 2

  • Ah

    More amps means that the wheel will work for a longer time until the battery runs out. Usually, 5 to 6 amps (Ah) are enough for most tasks.

  • Brushless

    The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

    1
  • See all
941 00 €
Delivery by Thu, 05 Nov
17,00 €   shipping cost
Sent from Greece
From Stereotiki 4.9 (4)
4.9 (4 reviews)
Greece
See Power Tools on the page of Stereotiki

Learn more about invoicing
Review the product
Product report

Description

Description

At a glance

  • POWERSTATE brushless motor: Brushless design for high power, maximum durability and extended service life.
  • RAPIDSTOP braking system: Stops the disc in less than 2.5 seconds for superior protection.
  • 125 mm disc diameter: Cutting depth of up to 33 mm and a no-load speed of 9,000 rpm.
  • 2 x 5.5 Ah batteries & charger: Complete 18V Li-ion power kit for continuous runtime during demanding tasks.

Top-tier power with a POWERSTATE motor

Tackle any demanding grinding and cutting application with the POWERSTATE brushless motor. Combined with REDLINK PLUS electronics, it delivers exceptional durability and up to 145 cuts per charge in 2-inch electrical conduit. Work continuously at a consistent speed of 9,000 rpm and enjoy outstanding 18V performance on every tough job.

Advanced RAPIDSTOP protection and safety

Protect yourself with the ultra-fast RAPIDSTOP brake, which stops the disc in less than 2.5 seconds. Use the paddle safety switch with line-lock-out function to prevent accidental start-up, and rely on the anti-kickback system. Reduce vibrations with the anti-vibration handle for comfortable control during every cut.

Quick FIXTEC adjustment and complete autonomy

Change discs without extra tools thanks to the FIXTEC nut, and adjust the 125 mm guard instantly without a wrench. Protect the motor from debris with the removable dust screen, ensuring a longer service life. Make the most of the two 5.5 Ah batteries and charger included in the carrying case, and work with complete freedom wherever you are.

Technical Specifications

  • Manufacturer: Milwaukee
  • Model: M18 FHSAG125XPDB-552X
  • Product code: 4933471080
  • EAN: 4058546287085
  • Voltage: 18 V
  • Battery type: Li-ion
  • Battery capacity: 5.5 Ah
  • Number of batteries: 2
  • Motor: POWERSTATE brushless
  • Electronics: REDLINK PLUS
  • Disc diameter: 125 mm
  • Maximum cutting depth: 33 mm
  • No-load speed: 9000 rpm
  • Spindle thread: M14
  • Switch type: Paddle switch (non-locking)
  • Brake system: RAPIDSTOP (in less than 2.5 s)
  • Line-lock-out (restart prevention): Yes
  • Anti-kickback protection: Yes
  • Disc changing system: Tool-free FIXTEC nut
  • Guard: 125 mm, tool-free adjustment
  • Weight with battery: 3.4 kg

Package Contents

  • Milwaukee M18 FHSAG125XPDB angle grinder
  • 2 x 18V 5.5 Ah Li-ion batteries
  • Battery charger
  • Anti-vibration side handle
  • 125 mm keyless guard
  • FIXTEC nut
  • Removable dust screen
  • Carrying case

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Power Source
Battery

Power Source

Battery

Ideal for outdoor work away from power outlets or in environments where connection to electricity is dangerous (e.g. boiler rooms).
Maximum Motor Speed
9000 rpm

Maximum Motor Speed

The faster the speed, the easier the wheel can cut through material. Wheels with smaller diameter (up to 150mm disc diameter) typically operate at 10,000 rpm, while those with larger diameter (with disc diameter above 180mm) operate at 6,500 rpm.
Thread
M14

Thread

It is the part of the tool's shaft where the cutting or grinding disc is attached.
Maximum Disc Diameter
125 mm

Maximum Disc Diameter

From 115mm to 150mm, it satisfactorily covers most amateur and professional tasks. The cutting depth ranges from 30mm to 40mm. A smaller disc diameter means that the wheel will be more flexible for simple tasks (e.g. electrical, plumbing, or DIY projects).

From 180mm and above, it concerns industrial applications that require a larger cutting/sanding surface. The cutting depth is from 70mm and above.
Weight (with Battery)
3400 gr

Battery Specifications

Number of Batteries
2
Volt
18 V
Ah
5.5 Ah

Ah

More amps means that the wheel will work for a longer time until the battery runs out. Usually, 5 to 6 amps (Ah) are enough for most tasks.
Lithium
Yes

Features & Functions

Speed Adjustment
No

Speed Adjustment

Helps with tasks that require less speed and more detail such as sanding, polishing, DIY projects.
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.
Soft Start
No

Soft Start

Feature that controls the starting speed of the tool when it is activated, so that it does not start abruptly at maximum torque.
Keyless Guard Adjustment
No
With Brake
Yes

With Brake


It features a rapid disc rotation stopping system. It slows down and stops the disc rotation within 1-2 seconds.
Keyless Disc Change
Yes

Keyless Disc Change


This mechanism uses a special nut or fastening system that can be tightened and loosened by hand, without tools. 

Accessories

Carrying Case
Case

Carrying Case

Case
Delivered with a carrying case.
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

At a glance

  • POWERSTATE brushless motor: Brushless design for high power, maximum durability and extended service life.
  • RAPIDSTOP braking system: Stops the disc in less than 2.5 seconds for superior protection.
  • 125 mm disc diameter: Cutting depth of up to 33 mm and a no-load speed of 9,000 rpm.
  • 2 x 5.5 Ah batteries & charger: Complete 18V Li-ion power kit for continuous runtime during demanding tasks.

Top-tier power with a POWERSTATE motor

Tackle any demanding grinding and cutting application with the POWERSTATE brushless motor. Combined with REDLINK PLUS electronics, it delivers exceptional durability and up to 145 cuts per charge in 2-inch electrical conduit. Work continuously at a consistent speed of 9,000 rpm and enjoy outstanding 18V performance on every tough job.

Advanced RAPIDSTOP protection and safety

Protect yourself with the ultra-fast RAPIDSTOP brake, which stops the disc in less than 2.5 seconds. Use the paddle safety switch with line-lock-out function to prevent accidental start-up, and rely on the anti-kickback system. Reduce vibrations with the anti-vibration handle for comfortable control during every cut.

Quick FIXTEC adjustment and complete autonomy

Change discs without extra tools thanks to the FIXTEC nut, and adjust the 125 mm guard instantly without a wrench. Protect the motor from debris with the removable dust screen, ensuring a longer service life. Make the most of the two 5.5 Ah batteries and charger included in the carrying case, and work with complete freedom wherever you are.

Technical Specifications

  • Manufacturer: Milwaukee
  • Model: M18 FHSAG125XPDB-552X
  • Product code: 4933471080
  • EAN: 4058546287085
  • Voltage: 18 V
  • Battery type: Li-ion
  • Battery capacity: 5.5 Ah
  • Number of batteries: 2
  • Motor: POWERSTATE brushless
  • Electronics: REDLINK PLUS
  • Disc diameter: 125 mm
  • Maximum cutting depth: 33 mm
  • No-load speed: 9000 rpm
  • Spindle thread: M14
  • Switch type: Paddle switch (non-locking)
  • Brake system: RAPIDSTOP (in less than 2.5 s)
  • Line-lock-out (restart prevention): Yes
  • Anti-kickback protection: Yes
  • Disc changing system: Tool-free FIXTEC nut
  • Guard: 125 mm, tool-free adjustment
  • Weight with battery: 3.4 kg

Package Contents

  • Milwaukee M18 FHSAG125XPDB angle grinder
  • 2 x 18V 5.5 Ah Li-ion batteries
  • Battery charger
  • Anti-vibration side handle
  • 125 mm keyless guard
  • FIXTEC nut
  • Removable dust screen
  • Carrying case

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Power Source
Battery

Power Source

Battery

Ideal for outdoor work away from power outlets or in environments where connection to electricity is dangerous (e.g. boiler rooms).
Maximum Motor Speed
9000 rpm

Maximum Motor Speed

The faster the speed, the easier the wheel can cut through material. Wheels with smaller diameter (up to 150mm disc diameter) typically operate at 10,000 rpm, while those with larger diameter (with disc diameter above 180mm) operate at 6,500 rpm.
Thread
M14

Thread

It is the part of the tool's shaft where the cutting or grinding disc is attached.
Maximum Disc Diameter
125 mm

Maximum Disc Diameter

From 115mm to 150mm, it satisfactorily covers most amateur and professional tasks. The cutting depth ranges from 30mm to 40mm. A smaller disc diameter means that the wheel will be more flexible for simple tasks (e.g. electrical, plumbing, or DIY projects).

From 180mm and above, it concerns industrial applications that require a larger cutting/sanding surface. The cutting depth is from 70mm and above.
Weight (with Battery)
3400 gr

Battery Specifications

Number of Batteries
2
Volt
18 V
Ah
5.5 Ah

Ah

More amps means that the wheel will work for a longer time until the battery runs out. Usually, 5 to 6 amps (Ah) are enough for most tasks.
Lithium
Yes

Features & Functions

Speed Adjustment
No

Speed Adjustment

Helps with tasks that require less speed and more detail such as sanding, polishing, DIY projects.
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.
Soft Start
No

Soft Start

Feature that controls the starting speed of the tool when it is activated, so that it does not start abruptly at maximum torque.
Keyless Guard Adjustment
No
With Brake
Yes

With Brake


It features a rapid disc rotation stopping system. It slows down and stops the disc rotation within 1-2 seconds.
Keyless Disc Change
Yes

Keyless Disc Change


This mechanism uses a special nut or fastening system that can be tightened and loosened by hand, without tools. 

Accessories

Carrying Case
Case

Carrying Case

Case
Delivered with a carrying case.
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

941,00 €
17,00 €   shipping cost