At around €45, I don't think there is a better case, but it's good to know some things about the case that are not often mentioned.
1) It comes with exactly the number of screws needed to install the basic components. If you want to add a second hard drive, for example, you will need to purchase the appropriate screws yourself.
2) The pre-installed front fan is placed in the lowest position, which would cool any HDD you install. It cannot be placed elsewhere as it has specific screws that do not fit in other places. So, you need to purchase extra screws (again) to place it elsewhere, or the fan remains in a suboptimal position for cooling the space.
3) The case has only one side grille for air intake, which does not have a dust filter.
4) The brackets at the back from which the graphics card outputs protrude are not repositionable. They break. Once and for all. So, first you weigh how many and which ones you need to remove to install the card, and then you break them.
5) In five months, the power (blue) and disk LED (red) initially weakened and then died. These lights are not particularly useful, but it is something that was observed IN BOTH STRONGHOLD CASES I PURCHASED.
6) The cables of the case that connect to the motherboard for USB ports, audio, lights, etc. are attached to the front panel of the case, meaning they come out with it. Therefore, if someone wants to remove the front panel to clean, for example, the front fans of the case, they need to first remove the cables from the motherboard and then reattach them.
Στα ~45€ δε νομίζω να υπάρχει καλύτερο κουτί, ωστόσο καλό είναι να γνωρίζουμε κάποια πραγματάκια σχετικά με το κουτί που δε βλέπω να αναφέρονται συχνά.
1) Έρχεται με ακριβώς όσες βίδες θα χρειαστεί κανείς για να βάλει τα στοιχειώδη κομμάτια μέσα. Σε περίπτωση που θέλετε να βάλετε κάποιον δεύτερο δίσκο για παράδειγμα, θα πρέπει και να προμηθευτείτε τις ανάλογες βίδες μόνοι σας.
2) Το μπροστινό προεγκατεστημένο ανεμιστηράκι είναι τοποθετημένο στη χαμηλότερη θέση, αυτή που θα έψυχε τυχόν HDD αν βάλετε. Δεν μπορεί να τοποθετηθεί σε κάποια άλλη καθώς έχει συγκεκριμένες βίδες οι οποίες δεν κουμπώνουν σε άλλο σημείο. Οπότε προμηθεύεστε έξτρα βίδες (άλλη μια φορά) για να το τοποθετήσετε αλλού, είτε το ανεμιστηράκι παραμένει στη μη βέλτιστη θέση για την ψύξη του χώρου.
3) Το κουτί έχει μόνο μια γρίλια μπροστά στο πλάι για να μπαίνει αέρας, η οποία δεν έχει φίλτρο σκόνης.
4) Τα λαμάκια στο πίσω μέρος από τα οποία προβάλλουν οι έξοδοι της κάρτας γραφικών, δεν είναι επανατοποθετούμενα. Τα σπάτε. Μια και καλή. Οπότε πρώτα ζυγίζετε πόσα και ποια χρειάζεται να βγάλετε για να μπει η κάρτα και μετά σπάτε.
5) Στους 5 μήνες, το power (μπλε) και το disk LED (κόκκινο) αρχικά εξασθένησαν και κατόπιν παρέδωσαν πνεύμα. Δεν έχουν καμία ιδιαίτερη χρησιμότητα τα φωτάκια αυτά ωστόσο είναι κάτι που παρατηρήθηκε ΚΑΙ ΣΤΑ 2 STRONGHOLD ΠΟΥ ΑΓΟΡΑΣΑ.
6) Τα καλώδια του κουτιού που καταλήγουν στη μητρική για τις θύρες usb, ήχο, φωτάκια κλπ ειναι καρφωμένα πάνω στο front panel του κουτιου, βγαίνουν δηλαδή μαζί του. Και άρα αν θέλει κανείς να βγάλει το front panel για να καθαρίσει πχ τα μπροστινά ανεμιστηράκια του κουτιού πρέπει να βγάλει αρχικά τα καλώδια από τη μητρική και να τα ξαναβάλει μετα.