It does its job just fine. Its size is unbelievable, it's even smaller than a box of rusks!! The only downside is the small body clamp it has, otherwise it's perfect. Incredibly value for money

If you change its cables, the ground and the clamp, which are fake especially the ground one, and buy good commercial ones that fit, you have an excellent welding machine for semi-professional use...

Very easy to use, excellent durability, amazing performance even at 200A with a 5mm electrode!!!!! I recommend it to beginners..... Give it enough amperage to perform properly, don't be afraid!!!! It works excellently with a 3.5mm electrode for galvanized without having to grind off the galvanization.

No negatives except for the cables, which is not a problem because you put it on your shoulder and climb!!
Vfm 100%

As an amateur, I find it amazing since I do all my work at home 100%, my father who has been welding for 30 years adored it and wants the same one as a birthday gift, I gave it to him to weld and he went crazy, featherlight, ridiculously small in size, performance of professional machines and costs as much as 10 packs of cigarettes... buy it with your eyes closed, as for the cables, yes they are a bit short, but it is designed to be hung on your shoulder with the strap since it weighs 2 kilos!!!

The ultimate electric welding does the same job as many more expensive ones and has the advantage of being easier to transport, perhaps it could use slightly longer cables!!

As a beginner in the world of welding but a professional in online shopping, I chose the S-Mini 140 based on reviews. And I wasn't disappointed. It is a reliable device that does what it promises for amateurs like me; I tested it from low to high, that is, from 60-140 amps, and it didn't falter. If only the cables were a bit longer, but the device is fine to carry on your shoulder, after all, it weighs 2.5 kg. I recommend it for anyone who wants to start entering the world of welding.

Very good. Lightweight. Correct arc. Doesn't "stick." Melts even a 3mm electrode. I used it continuously for 6 hours with a 2.5mm galvanized electrode, with perfect results.

It is very lightweight and convenient. It does not heat up even after extensive use. It has the logic of a portable device so the cable is relatively small. The clamp and the body could be of better quality but for its price it is very good. I am very satisfied. There is no amateur who would not be covered by it.

The tool is great. Without having much experience even though I am not a mechanic, I glued perfectly. I didn't expect it to work so well for the money.

I am going to mention comments about this specific product because it is one of the few on the market that is worth 100%. I have worked with it for up to 4 hours continuously on heavy adhesions. It is the ultimate tool for an amateur and of course for anyone who wants to enter the field of welding.

I am not writing a detailed review, anyone interested can ask me.

No weight at all and small size, you put it on your shoulder and stick it! Until noon, it sticks solidly with a diameter of 16mm for fences, with a small break here and there to catch its breath, it didn't notice anything. It's definitely not for professional use, but it literally eats iron

Amazing machine, I bought it and I am satisfied. Now I am learning how to stick things together and it works wonders. I made my first barbecue, okay, some sticking issues, but now I am learning. I give it ten stars

I have bought three!!! One for home, one for the workplace, and one as a gift for a friend in the countryside, where he does "miracles", not only with iron but with various materials. One thing I have to say: buy it with closed eyes. Recently, I also bought three-meter cables and I am a "king", even when I'm not wearing it.

How do women have the bag hanging on their shoulder? Is it the equivalent for men where we can carry it on our shoulder?
The tool really doesn't exist, you hang it on your shoulder and go wherever you want with whatever means you want, however you want.
It doesn't get stuck anywhere, it's a donkey... the only downside is the short cables and the small body clamp where you can't bite it on thick and chunky samples (logical for the size of the machine), you can change these with very little cost.
The evaluation concerns private-amateur use.
Although I read that professionals exploit it for difficult points.

Very heavy welding, only Pyrrhus Dimas can lift it.
The machine is fine and sticks well and is light like a game. For its price, it is a wonderful machine.

Personally, for small hobbies, I am satisfied. Let's not forget that you are paying 70€, so don't expect professional use.

Compared to a larger inverter I have from Einhell, the Helix is a bit troublesome as the electrode sticks at the beginning. While with the Einhell, I am completely satisfied (it welds very smoothly and with detail), it is just a little heavy

For an amateur, it seems perfect. It may not have very long cables, but it is so small that you wear it like a bag

It doesn't fill your eye at all, you think it's a game until you start sticking, but your opinion changes radically about it, it has done a lot of work without creating the slightest problem, I stick with the 2.5 electrode

I had it for a year and used it twice for big jobs. It is generally a good welding machine for its price, but only suitable for small tasks and purely amateur use. It has short cables, the grounding is useless, it doesn't hold up well, and it broke after a few uses. The burners wore out almost immediately, resulting in loose cables and erratic arcs during prolonged use. Opening it up reveals poor quality on the inside, with no insulation whatsoever. It burned out over time. I believe it served its purpose, but next time I will prefer to spend a little more and get a higher quality machine. This one is only good for minor tasks at most.

The best in its category. That's what the comments say. I got hooked for the first time and built a whole cage 4 X 2.30. If it had a longer cable, it would be amazing.

Good soldering for amateur use, nothing else, the only downside of this specific soldering is the short cables

Very good tool, I didn't expect it, I bought it because of the good reviews, it's worth someone getting it, it's always the best for amateur use

It has short cables but ok.. it sucks my blood almost daily at work, it hasn't failed yet! For extreme climbing or any stunt work, I have it and use it as a small bag on my shoulder due to its small size!

You get it as a backup and end up sticking only with it. However, it would like a slightly longer pinch cable, which can be easily changed.

I have had it for a week for amateur use and the machine "performs excellently". I bought it for 57 euros from an online offer and I can say that it was worth more. Ideal for an amateur or for small-scale professional use, but not for a craftsman who works with metal constructions all day. It can handle thick iron and work all day, of course. In combination with a good automatic mask, gloves, as well as the right clothing and shoes, you can recover the cost after 2-3 small jobs. It comes with a 2-year warranty. I don't know how long it will last, but I think that if I don't push it too hard - by paying attention to the machine's performance values (60%/140A - 100%/108A) - I won't have a problem. The cables are short, but it's not a problem due to the small volume and weight (2.3kg) - therefore, it is portable.

As a beginner starting to learn from video lessons, this machine is amazing. Without being an expert, I would say it outperforms many other machines. I have drilled through concrete walls and anything you can imagine. I have had it for about 2 years and even if you push it to its limits, it still melts anything it finds if you're not careful with what you're doing

I am unfamiliar with adhesives, and with this machine, I managed to glue for fun. I consider the size of the cable that bothers many to be ideal due to the portability of the machine. Because if, for example, you hang it on your shoulder and climb a ladder, a longer cable might be a problem. Of course, I also recommend it, listening to some experts in welding quality. However, what I can definitely see is how easily you can make a weld. The electrode did not stick to me even once. The adjustment of the amps is also precise and immediate. For these reasons, the biggest advantage seems to be the quality-price ratio. It is not a coincidence that it is a top seller at Skroutz, it has the best reviews, and it is also the cheapest. So get up from sofas, beds...