Skroutz.mt

Leo Group AJm75 Alu Electric Surface Water Pump with Automatic Suction 1hp Single-Phase /M
Surface Water Pumps

Leo Group AJm75 Alu Electric Surface Water Pump with Automatic Suction 1hp Single-Phase /M Code: 01006

Key features:

  • Impeller type: Stainless steel
  • Horsepower: 1 HP
  • Voltage: 220V
See full description

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
Review the product
Product report

Description

Description

Product Code: 01006/M

Type of Pump: Self-priming water pump

Impeller Type: Stainless steel

Horsepower: 1 HP

Voltage: 220V

  • Water Delivery (max): 0 cubic meters/hour => Meters (max): 46 m
  • Water Delivery (max): 1.2 cubic meters/hour => Meters (max): 34 m
  • Water Delivery (max): 2.1 cubic meters/hour => Meters (max): 28 m
  • Water Delivery (max): 3.0 cubic meters/hour => Meters (max): 23 m
  • Water Delivery (max): 3.3 cubic meters/hour => Meters (max): 20 m

Inlet Port: Front

Inlet (Port): 1''

Outlets (Ports): 1'' + 1''

Weight: 10 KG

Capabilities

Pump with the ability for automatic suction of water or other liquids with the same physical and chemical properties as water. Particularly suitable for domestic use, pressure units, small agricultural applications, irrigation, and any other application requiring automatic suction. It consists of a cast iron pump body and a stainless steel impeller and shaft. Its rotor is made of stainless steel.

Durable Construction

Electric surface water pump by Leo Group, suitable for use with clean water and liquids that do not damage the pump. It is designed to pump water even in cases where there is air and is recommended for domestic, small irrigation uses (garden) as well as for water distribution with silent operation. The pump should be installed in an enclosed environment or at least protected from adverse weather conditions.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
01006

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Power
750 W
Flow Rate
3.3 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
46 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Product Code: 01006/M

Type of Pump: Self-priming water pump

Impeller Type: Stainless steel

Horsepower: 1 HP

Voltage: 220V

  • Water Delivery (max): 0 cubic meters/hour => Meters (max): 46 m
  • Water Delivery (max): 1.2 cubic meters/hour => Meters (max): 34 m
  • Water Delivery (max): 2.1 cubic meters/hour => Meters (max): 28 m
  • Water Delivery (max): 3.0 cubic meters/hour => Meters (max): 23 m
  • Water Delivery (max): 3.3 cubic meters/hour => Meters (max): 20 m

Inlet Port: Front

Inlet (Port): 1''

Outlets (Ports): 1'' + 1''

Weight: 10 KG

Capabilities

Pump with the ability for automatic suction of water or other liquids with the same physical and chemical properties as water. Particularly suitable for domestic use, pressure units, small agricultural applications, irrigation, and any other application requiring automatic suction. It consists of a cast iron pump body and a stainless steel impeller and shaft. Its rotor is made of stainless steel.

Durable Construction

Electric surface water pump by Leo Group, suitable for use with clean water and liquids that do not damage the pump. It is designed to pump water even in cases where there is air and is recommended for domestic, small irrigation uses (garden) as well as for water distribution with silent operation. The pump should be installed in an enclosed environment or at least protected from adverse weather conditions.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
01006

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Power
750 W
Flow Rate
3.3 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
46 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

99,60 €
23,00 €   shipping cost