Skroutz.mt

Pentax Electric Surface Water Pump Centrifugal 1.5hp Single-Phase
Surface Water Pumps

Pentax Electric Surface Water Pump Centrifugal 1.5hp Single-Phase Code: CM164/01Μ

The Pentax CM164/01M electric centrifugal surface pump is designed for clean water and liquids whose composition does not corrode its materials. This single-stage, single-impeller pump is suitable for...

The Pentax CM164/01M electric centrifugal surface pump is designed for clean water and liquids whose composition does not corrode its materials. This single-stage, single-impeller pump is suitable for domestic, municipal and industrial applications, and operates at a constant pressure across varying flow rates. It must be installed indoors or protected from...

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Centrifugal

    Pumps with impellers that enhance water flow.
  • Voltage Single-Phase

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The Pentax CM164/01M electric centrifugal surface pump is designed for clean water and liquids whose composition does not corrode its materials. This single-stage, single-impeller pump is suitable for domestic, municipal and industrial applications, and operates at a constant pressure across varying flow rates. It must be installed indoors or protected from adverse weather conditions.

The casing is made of cast iron, the impeller of brass, the mechanical seal of ceramic graphite, and the shaft of AISI 303 stainless steel. The motor is two-pole and features thermal protection.

  • Type: Centrifugal surface pump, single-stage, single-impeller
  • Power supply: Electric
  • Power: 1100 W
  • Horsepower: 1.5 hp
  • Voltage: Single-phase, 1 × 230 V
  • Installation: Horizontal
  • Head: 39 m
  • Operating pressure: Up to 8 bar
  • Flow rate: 1.2–6.6 m³/h
  • Casing: Cast iron
  • Impeller: Brass
  • Mechanical seal: Ceramic graphite
  • Shaft: AISI 303 stainless steel
  • Liquid temperature: 0–90 °C
  • Motor: Two-pole with thermal protection
  • Protection rating: IP44
  • Insulation class: F
  • Ports: 1¼″ × 1″

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
CM164/01Μ

Main Specifications

Type
Single Stage

Type

Single Stage
They have a wing, making maintenance quite easy. They are suitable for low pressure operations where a high flow rate is maintained (e.g. irrigation).
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1.5 hp
Power
1100 W
Manometric Head
39 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Pentax CM164/01M electric centrifugal surface pump is designed for clean water and liquids whose composition does not corrode its materials. This single-stage, single-impeller pump is suitable for domestic, municipal and industrial applications, and operates at a constant pressure across varying flow rates. It must be installed indoors or protected from adverse weather conditions.

The casing is made of cast iron, the impeller of brass, the mechanical seal of ceramic graphite, and the shaft of AISI 303 stainless steel. The motor is two-pole and features thermal protection.

  • Type: Centrifugal surface pump, single-stage, single-impeller
  • Power supply: Electric
  • Power: 1100 W
  • Horsepower: 1.5 hp
  • Voltage: Single-phase, 1 × 230 V
  • Installation: Horizontal
  • Head: 39 m
  • Operating pressure: Up to 8 bar
  • Flow rate: 1.2–6.6 m³/h
  • Casing: Cast iron
  • Impeller: Brass
  • Mechanical seal: Ceramic graphite
  • Shaft: AISI 303 stainless steel
  • Liquid temperature: 0–90 °C
  • Motor: Two-pole with thermal protection
  • Protection rating: IP44
  • Insulation class: F
  • Ports: 1¼″ × 1″

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
CM164/01Μ

Main Specifications

Type
Single Stage

Type

Single Stage
They have a wing, making maintenance quite easy. They are suitable for low pressure operations where a high flow rate is maintained (e.g. irrigation).
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1.5 hp
Power
1100 W
Manometric Head
39 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

320,00 €
80,00 €   shipping cost