Skroutz.mt

FFG SPP 800 Electric Surface Water Pump with Automatic Suction 1.1hp Single-Phase
Surface Water Pumps

FFG SPP 800 Electric Surface Water Pump with Automatic Suction 1.1hp Single-Phase Code: 43485

SPP 800 Surface Pump JET 1.1Hp

  • Nominal power: 0.8 kW / 1.1 hp
  • Maximum pressure: 3.8 bar
  • Maximum flow rate: 3.5 m³/h
  • Maximum manometric height: 38 m
  • Maximum suction height: 8 m
  • Maximum particle size:...

SPP 800 Surface Pump JET 1.1Hp

  • Nominal power: 0.8 kW / 1.1 hp
  • Maximum pressure: 3.8 bar
  • Maximum flow rate: 3.5 m³/h
  • Maximum manometric height: 38 m
  • Maximum suction height: 8 m
  • Maximum particle size: 1 mm
  • Inlet/outlet: 1"/1"
  • Maximum noise: 85 dB
  • Maximum water temperature: 35 °C
  • Protection: IPX4
  • Insulation class: B
  • Cable: 1.1 m
  • Weight: 6.4 kg

Performance

  • ...
See full description See full description

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
82 80 €
Delivery by Fri, 03 Jul
20,00 €   shipping cost
Sent from Greece
From MdTools 5.0 (50)
5.0 (50 reviews)
Greece
1 piece
See Water Pumps on the page of MdTools
Review the product
Product report

Description

Description

SPP 800 Surface Pump JET 1.1Hp

  • Nominal power: 0.8 kW / 1.1 hp
  • Maximum pressure: 3.8 bar
  • Maximum flow rate: 3.5 m³/h
  • Maximum manometric height: 38 m
  • Maximum suction height: 8 m
  • Maximum particle size: 1 mm
  • Inlet/outlet: 1"/1"
  • Maximum noise: 85 dB
  • Maximum water temperature: 35 °C
  • Protection: IPX4
  • Insulation class: B
  • Cable: 1.1 m
  • Weight: 6.4 kg

Performance

  • L/h: 600, 1,600, 3,100, 3,300, 3,600
  • L/min: 9, 27, 53, 55, 60
  • Height (m): 30, 20, 10, 5, 0.5

Description

Jet surface pump for rainwater applications. Suitable for small to medium domestic applications, garden watering, car washing, and floor cleaning. Capable of pumping from 0.5m. Induction motor, SiC sealing gasket, and INOX shaft for extended lifespan. Motor protection IPX4.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
43485

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1.1 hp
Power
800 W
Flow Rate
3.5 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
38 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
3.8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

SPP 800 Surface Pump JET 1.1Hp

  • Nominal power: 0.8 kW / 1.1 hp
  • Maximum pressure: 3.8 bar
  • Maximum flow rate: 3.5 m³/h
  • Maximum manometric height: 38 m
  • Maximum suction height: 8 m
  • Maximum particle size: 1 mm
  • Inlet/outlet: 1"/1"
  • Maximum noise: 85 dB
  • Maximum water temperature: 35 °C
  • Protection: IPX4
  • Insulation class: B
  • Cable: 1.1 m
  • Weight: 6.4 kg

Performance

  • L/h: 600, 1,600, 3,100, 3,300, 3,600
  • L/min: 9, 27, 53, 55, 60
  • Height (m): 30, 20, 10, 5, 0.5

Description

Jet surface pump for rainwater applications. Suitable for small to medium domestic applications, garden watering, car washing, and floor cleaning. Capable of pumping from 0.5m. Induction motor, SiC sealing gasket, and INOX shaft for extended lifespan. Motor protection IPX4.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
43485

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1.1 hp
Power
800 W
Flow Rate
3.5 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
38 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
3.8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

82,80 €
20,00 €   shipping cost