Nanophos SurfaPaint ThermoDry Exterior plastic paint is an acrylic thermal-insulating paint for exterior surfaces such as walls, masonry, concrete, plaster and plasterboard. Its coating has low thermal conductivity, reflects infrared radiation, re-emits heat and prevents moisture penetration. It is certified as a cool paint by the European Cool Roofs Council (ECRC).
The white paint can be tinted to produce light shades. It covers hairline cracks up to 0.5 mm without dilution; if needed, dilute with up to 10% water by volume. Apply to clean, dry surfaces using a brush, roller or spray gun, in 2–3 coats. The application temperature is 8–35 °C, and subsequent coats should be applied 4–6 hours after the previous coat.
- Type: Acrylic thermal-insulating plastic paint
- Use: Exterior
- Colour: White
- Quantity: 3 L
- Application surfaces: Walls, masonry, concrete, plaster and plasterboard
- Thermal properties: Low thermal conductivity, reflects infrared radiation and re-emits heat
- Moisture protection: Prevents moisture penetration
- Crack coverage: Hairline cracks up to 0.5 mm without dilution
- Dilution: Up to 10% water by volume, if needed
- Application: 2–3 coats using a brush, roller or spray gun
- Application temperature: 8–35 °C
- Time between coats: 4–6 hours
- Drying time: Approximately 1 hour, depending on coat thickness
- Coverage: 10–12 m²/L
- Certification: European Cool Roofs Council (ECRC)
- Usage
- Exterior
- Quantity
- 3 lt
- Features
- Acrilyc, Thermal insulation
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.