Skroutz.mt

Pedrollo 3CPm 80 Electric Surface Water Pump with Automatic Suction 0.6hp Single-Phase
Surface Water Pumps

Pedrollo 3CPm 80 Electric Surface Water Pump with Automatic Suction 0.6hp Single-Phase Code: 100127

The Pedrollo 3CPm 80 surface pump is a multistage pump designed for horizontal installation. It has a cast-iron body and a NORYL plastic impeller. Its maximum flow rate is 4.2 m³/h and its maximum...

The Pedrollo 3CPm 80 surface pump is a multistage pump designed for horizontal installation. It has a cast-iron body and a NORYL plastic impeller. Its maximum flow rate is 4.2 m³/h and its maximum head is 40 m.

  • Power supply: Electric
  • Type: Multistage
  • Power: 0.6 hp / 440 W
  • Voltage: 220 V / 50 Hz, single-phase
  • Priming: Automatic
  • Installation: Horizontal
  • Body...
See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
  • Voltage Single-Phase
  • See all
187 00 €
Delivery Fri, 06 Nov - Tue, 10 Nov
47,00 €   shipping cost
Sent from Greece
From Istikoglou
Greece
See Water Pumps on the page of Istikoglou

Learn more about invoicing
Review the product
Product report

Description

Description

The Pedrollo 3CPm 80 surface pump is a multistage pump designed for horizontal installation. It has a cast-iron body and a NORYL plastic impeller. Its maximum flow rate is 4.2 m³/h and its maximum head is 40 m.

  • Power supply: Electric
  • Type: Multistage
  • Power: 0.6 hp / 440 W
  • Voltage: 220 V / 50 Hz, single-phase
  • Priming: Automatic
  • Installation: Horizontal
  • Body material: Cast iron
  • Impeller material: NORYL plastic
  • Inlet port: 1" (25 mm)
  • Outlet port: 1" (25 mm)
  • Maximum flow rate: 4.2 m³/h
  • Maximum head: 40 m
  • Suction lift: 7 m
  • Pumped liquid temperature: 40 °C
  • Ambient temperature: 40 °C
  • Noise level: Low
  • Weight: 10.3 kg
  • Dimensions: 33.8 × 15.8 × 17.2 cm (length × width × height)

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
100127

Main Specifications

Type
Multistage

Type

Multistage
Pumps with 3 or more blades exert high pressure and achieve maximum efficiency. Ideal for homes with low water pressure.
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
0.6 hp
Power
440 W

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Pedrollo 3CPm 80 surface pump is a multistage pump designed for horizontal installation. It has a cast-iron body and a NORYL plastic impeller. Its maximum flow rate is 4.2 m³/h and its maximum head is 40 m.

  • Power supply: Electric
  • Type: Multistage
  • Power: 0.6 hp / 440 W
  • Voltage: 220 V / 50 Hz, single-phase
  • Priming: Automatic
  • Installation: Horizontal
  • Body material: Cast iron
  • Impeller material: NORYL plastic
  • Inlet port: 1" (25 mm)
  • Outlet port: 1" (25 mm)
  • Maximum flow rate: 4.2 m³/h
  • Maximum head: 40 m
  • Suction lift: 7 m
  • Pumped liquid temperature: 40 °C
  • Ambient temperature: 40 °C
  • Noise level: Low
  • Weight: 10.3 kg
  • Dimensions: 33.8 × 15.8 × 17.2 cm (length × width × height)

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
100127

Main Specifications

Type
Multistage

Type

Multistage
Pumps with 3 or more blades exert high pressure and achieve maximum efficiency. Ideal for homes with low water pressure.
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
0.6 hp
Power
440 W

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

187,00 €
47,00 €   shipping cost