PGP Dryproof Masonry Waterproofer is a cementitious waterproofing product for walls, basements, and other cement-based or plaster surfaces, above or below ground, indoors and outdoors. It is ready to use, requires no dilution, and serves as both a waterproofing coating and render while allowing the surface to breathe. Apply to unpainted cement-based surfaces with a brush or roller.
Apply at least two coats, waiting 12 hours after the first coat. If water still penetrates after the second coat, apply a third coat to areas with open holes or cracks. After application, it can be finished with paint, filler, plaster, or tiles.
- Type: Cementitious waterproofing product
- Form: Brush-on liquid
- Capacity: 3 lt
- Colour: White
- Suitable surfaces: Walls, basements
- Surface materials: Cement-based surfaces, plaster
- Coverage: 2.5–3 m²/lt
- Dilution: Not required
- Application method: Brush or roller
- Touch dry: 3–4 hours at 20 °C
- Fully dry: 48 hours at 20 °C
- Application temperature: 10–35 °C
- Tool cleaning: White spirit or turpentine
- Use: Indoor and outdoor
Product Details
- Type
- Lubricating Liquid
- Colour
- White
- Application Surface
- Wall, Basement
- Application Surface Material
- Cementitious, Plaster
Additional Specifications
- Polyurethane
- No
- Elastomer
- No
- Acrylic
- No
- Bituminous
- No
- Cementitious
- Yes
- 2-Component
- No
Packaging
- Capacity
- 3 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.