• Continuous monitoring thermometer patch – not a handheld infrared thermometer.
• Bluetooth 4.0 connection with the Microlife Thermo 24 app.
• One measurement every 5 seconds, transferred to the app.
• It takes approximately 15 minutes after application for the reading to stabilize at body temperature.
• Adjustable high/low temperature limits in the app.
• For children aged 6 months and older, according to the instructions for use.
• Single-use adhesive patches.

• The device and the user should remain in a stable environment for at least 5 minutes before application.
• Clean and thoroughly dry the armpit and the surrounding area.
• Place the device in the center of the special patch, with the sensor in direct contact with the skin and as close to the armpit as possible.
• Stick the patch directly onto the skin under the armpit, lower the arm and wait approximately 15 minutes for the reading to stabilize.
• Regularly check that the sensor remains in good contact with the skin.

Measurement time: The device takes one measurement every 5 sec, but after the initial placement it takes approximately 15 minutes for the reading to reach body temperature.

Important: This is not a traditional infrared thermometer. It is a Bluetooth patch sensor for continuous monitoring and is used differently from non-contact forehead and ear thermometers.

• Type: Bluetooth thermometer patch 
• Range: 32–43 °C 
• Accuracy: ±0.1 °C 
• Measurement rate: Every 5 sec 
• Initial stabilization time: ~15 minutes 
• Bluetooth: 4.0 
• Battery: CR2032 
• Suitable age: From 6 months