Skroutz.mt

BSE 8-4 50 Electric burnishing Polisher 800W with Speed Control 453404
Sanders

BSE 8-4 50 Electric burnishing Polisher 800W with Speed Control 453404

The Flex BSE 8-4 50 satin finishing machine is designed for sanding and has a rated power of 800 W. Its no-load speed is adjustable from 1,400 to 4,000 rpm, and the cable is 4 m long.

  • Power supply:...

The Flex BSE 8-4 50 satin finishing machine is designed for sanding and has a rated power of 800 W. Its no-load speed is adjustable from 1,400 to 4,000 rpm, and the cable is 4 m long.

  • Power supply: Mains
  • Power: 800 W
  • No-load speed: 1,400–4,000 min
  • Maximum accessory diameter: 125 mm
  • Sanding wheel width: 50 mm
  • Accessory bore: 19 mm
  • Cable length: 4 m
  • Weight:...
See full description See full description

Top specs

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Soft Start

    Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Reception Diameter 19 mm
  • Weight (Net) 2300 gr
  • See all
499 00 €
Delivery Tue, 10 Nov - Thu, 12 Nov
14,00 €   shipping cost
Sent from Greece
From Mytoolstore 3.8 (9)
3.8 (9 reviews)
Greece
20 pieces
See Power Tools on the page of Mytoolstore

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Flex BSE 8-4 50 satin finishing machine is designed for sanding and has a rated power of 800 W. Its no-load speed is adjustable from 1,400 to 4,000 rpm, and the cable is 4 m long.

  • Power supply: Mains
  • Power: 800 W
  • No-load speed: 1,400–4,000 min⁻¹
  • Maximum accessory diameter: 125 mm
  • Sanding wheel width: 50 mm
  • Accessory bore: 19 mm
  • Cable length: 4 m
  • Weight: 2.3 kg
  • Speed adjustment: Yes
  • Soft Start: Yes
  • Package contents: BS 50 satin finishing attachment (459577), Allen key (SW 4)

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
burnishing Polisher

Type

burnishing Polisher

Tribeio for smoothing mainly metallic surfaces with a rotating grinding head.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Socket Diameter
19 mm
Net Weight
2300 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
800 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
4000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Flex BSE 8-4 50 satin finishing machine is designed for sanding and has a rated power of 800 W. Its no-load speed is adjustable from 1,400 to 4,000 rpm, and the cable is 4 m long.

  • Power supply: Mains
  • Power: 800 W
  • No-load speed: 1,400–4,000 min⁻¹
  • Maximum accessory diameter: 125 mm
  • Sanding wheel width: 50 mm
  • Accessory bore: 19 mm
  • Cable length: 4 m
  • Weight: 2.3 kg
  • Speed adjustment: Yes
  • Soft Start: Yes
  • Package contents: BS 50 satin finishing attachment (459577), Allen key (SW 4)

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
burnishing Polisher

Type

burnishing Polisher

Tribeio for smoothing mainly metallic surfaces with a rotating grinding head.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Socket Diameter
19 mm
Net Weight
2300 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
800 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
4000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

499,00 €
14,00 €   shipping cost
Flex