Skroutz.mt

Pedrollo Electric Surface Water Pump with Automatic Suction 0.65hp Single-Phase
Surface Water Pumps

Pedrollo Electric Surface Water Pump with Automatic Suction 0.65hp Single-Phase Code: 43PJA6063A1

This pump is self-priming, suitable for use in clean water with the presence of air, without chemicals and corrosive elements that affect its construction materials. It features silent operation and...

This pump is self-priming, suitable for use in clean water with the presence of air, without chemicals and corrosive elements that affect its construction materials. It features silent operation and low energy consumption, ideal for domestic and urban use, in pressure systems with the use of a tank and in irrigation systems.

The installation should be...

See full description See full description

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
Review the product
Product report

Description

Description

This pump is self-priming, suitable for use in clean water with the presence of air, without chemicals and corrosive elements that affect its construction materials. It features silent operation and low energy consumption, ideal for domestic and urban use, in pressure systems with the use of a tank and in irrigation systems.

The installation should be carried out in well-ventilated areas, protected from extreme weather conditions.

  • Type: PLURIJET m 3/80
  • Pump Type: Multistage
  • Power Supply: Electric Current
  • Motor Power: 0.65 Hp
  • Power: 480 Watt
  • Voltage: 220 Volt/50 Hz
  • Absorption: 3.30 A
  • Intake Outlet: 1"-25mm
  • Discharge Outlet: 1"-25mm
  • Max Performance: 40.00 m
  • Max Flow Rate: 4.80 m3/h
  • Body Material: Stainless Steel AISI 304
  • Impeller Material: Plastic (NORYL)
  • Pumped Liquid Temperature: 40 °C
  • Ambient Temperature: 40 °C
  • Self-Priming: Yes
  • Priming Height: 9 m
  • Net Weight: 7.3 Kg
  • Product Length: 36.70 cm
  • Product Width: 18.20 cm
  • Product Height: 18.30 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
43PJA6063A1

Main Specifications

Type
Multistage

Type

Multistage
Pumps with 3 or more blades exert high pressure and achieve maximum efficiency. Ideal for homes with low water pressure.
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
0.65 hp
Power
480 W
Flow Rate
4.8 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
40 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

This pump is self-priming, suitable for use in clean water with the presence of air, without chemicals and corrosive elements that affect its construction materials. It features silent operation and low energy consumption, ideal for domestic and urban use, in pressure systems with the use of a tank and in irrigation systems.

The installation should be carried out in well-ventilated areas, protected from extreme weather conditions.

  • Type: PLURIJET m 3/80
  • Pump Type: Multistage
  • Power Supply: Electric Current
  • Motor Power: 0.65 Hp
  • Power: 480 Watt
  • Voltage: 220 Volt/50 Hz
  • Absorption: 3.30 A
  • Intake Outlet: 1"-25mm
  • Discharge Outlet: 1"-25mm
  • Max Performance: 40.00 m
  • Max Flow Rate: 4.80 m3/h
  • Body Material: Stainless Steel AISI 304
  • Impeller Material: Plastic (NORYL)
  • Pumped Liquid Temperature: 40 °C
  • Ambient Temperature: 40 °C
  • Self-Priming: Yes
  • Priming Height: 9 m
  • Net Weight: 7.3 Kg
  • Product Length: 36.70 cm
  • Product Width: 18.20 cm
  • Product Height: 18.30 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
43PJA6063A1

Main Specifications

Type
Multistage

Type

Multistage
Pumps with 3 or more blades exert high pressure and achieve maximum efficiency. Ideal for homes with low water pressure.
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
0.65 hp
Power
480 W
Flow Rate
4.8 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
40 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

215,00 €
53,00 €   shipping cost