Isomat Standard Color matte plastic paint is intended for indoor use and can be applied to concrete, plaster, plasterboard and other common building materials. It offers good coverage, spreadability and workability, as well as adhesion to new or previously painted surfaces. It has a low odour, contains no ammonia, and dries quickly, allowing for quick recoating.
Apply in two coats using a roller, brush or airless spray gun, either undiluted or diluted with 5–10% clean water. It covers approximately 12 m² per litre per coat on properly prepared surfaces. Clean tools with water immediately after use.
- Use: Interior
- Type: Plastic paint
- Colour: White
- Quantity: 9 L
- Finish: Matte
- Coverage: Approximately 12 m²/L/coat
- Drying time: 1 h to touch
- Recoating time: 3–4 h
- Application: Roller, brush or airless spray gun
- Dilution: 5–10% with clean water
- Ingredients: Ammonia-free
- Odour: Low
- Substrate: Concrete, plaster, plasterboard and other common building materials
- Volume solids: 41 ± 2%
- Viscosity: 115 ± 5 KU
- Density: 1.57 ± 0.03 kg/L
- Adhesion: ≥ 1.25 N/mm²
- pH: 8–9.5
- Water vapour permeability: Sd = 0.01 ± 0.005 m (V1, high)
- Capillary water absorption: w = 1.2 ± 0.05 kg/m²h^0.5 (W1, high)
- Whiteness: ≥ 86%
- Wet scrub resistance: Class 3 (EN ISO 11998)
- Tool cleaning: With water immediately after use
- Usage
- Interior
- Quantity
- 9 lt
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.