Skroutz.mt

Bell Broozer Free Ride Matte Gray/Black Motorcycle Helmet Modular ECE 22.05 1400gr
Motorcycle Helmets

Bell Broozer Free Ride Matte Gray/Black Motorcycle Helmet Modular ECE 22.05 1400gr

The wild combination of style and functionality makes the new Broozer from Bell a true road warrior. With dual certification for full-face and open-face riding, the removable chin guard, the...

The wild combination of style and functionality makes the new Broozer from Bell a true road warrior. With dual certification for full-face and open-face riding, the removable chin guard, the integrated visor, and weighing only 1350g, the Broozer is ready for anything.

See full description See full description

  • Type

    Modular

    Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.05

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all
This product does not exist at Skroutz anymore
Product report

Description

Description

The wild combination of style and functionality makes the new Broozer from Bell a true road warrior. With dual certification for full-face and open-face riding, the removable chin guard, the integrated visor, and weighing only 1350g, the Broozer is ready for anything.

Features

  • NutraFog II anti-scratch visor with fog and UV protection
  • Energy management with dual-density EPS lining
  • Ventilation with adjustable air vents
  • Lightweight PC / ABS LG shell in 3 sizes
  • Glasses compatibility
  • DOT ECE certification (P/J)
  • Removable chin guard


SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Weight (+/-50 gr)
1400 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Grey
Color Finish
-
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.05

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.05
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Glasses Holder
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (4)

Reviews

4.3
4
4.3
Review this product
  1. 2
  2. 1
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Construction quality
  • Visibility
  • Weight
  • Application
  • Value for money
  • Ventilation
  • High aerodynamic noise
  • Dr.Feel
    4
    3 out of 14 members found this review helpful
    Dr.Feel

    Verified purchase

    Look, I bought it for riding in the city with my scooter because it goes up to 65 km/h. I never go over 50 in the city with my scooter and the helmet makes a lot of noise as it doesn't have proper ventilation at the back, but all helmets are like that, so you know what you're getting. It suits me well, it's lightweight with good viewing angles and looks nice. The fit is very good, it has a narrow size range. I was between the S and the M (actually, my size was half a size above the S) and I got the M and it was perfect.

    Translated from Greek ·
    • Application
    • Construction quality
    • Visibility
    • Weight
    • Value for money
    • Ventilation
    • High aerodynamic noise
    Did you find this review helpful?
  • Mark_Anastasiadis
    5
    20 out of 21 members found this review helpful
    Mark_Anastasiadis
    This review is about the colour: Black

    Bell includes both visors in the helmet package when you purchase it. (It is shown in all unboxing videos.) I didn't know this and also ordered the smoked one. However, they didn't send it to me and I wasn't charged the additional 28€ that it costs. Just for your information, for those who are interested.

    Translated from Greek ·
    • Application
    • Ventilation
    • Construction quality
    • Visibility
    • Weight
    • Value for money
    • Moderate aerodynamic noise
    Did you find this review helpful?
  • 3
    KONSTANTINOS PARASKEVOPOULOS

    Verified purchase

    This review is about the colour: Black

    Unfortunately, it makes a lot of noise after 60km

    Translated from Greek ·
    • Ventilation
    • Construction quality
    • Visibility
    • Weight
    • Application
    • Value for money
    • High aerodynamic noise
    Did you find this review helpful?
  • 5
    Miltos35
    This review is about the colour: Black

    • Application
    • Construction quality
    • Visibility
    • Weight
    • Value for money
    • Moderate aerodynamic noise
  • Dr.Feel
    4
    Dr.Feel

    Look, I bought it for riding in the city with my scooter because it goes up to 65 km/h. I never go over 50 in the city with my scooter and the helmet makes a lot of noise as it doesn't have proper ventilation at the back, but all helmets are like that, so you know what you're getting. It suits me well, it's lightweight with good viewing angles and looks nice. The fit is very good, it has a narrow size range. I was between the S and the M (actually, my size was half a size above the S) and I got the M and it was perfect.

    Translated from Greek ·
    3
  • Mark_Anastasiadis
    5
    Mark_Anastasiadis

    Bell includes both visors in the helmet package when you purchase it. (It is shown in all unboxing videos.) I didn't know this and also ordered the smoked one. However, they didn't send it to me and I wasn't charged the additional 28€ that it costs. Just for your information, for those who are interested.

    Translated from Greek ·
    20
  • 3
    KONSTANTINOS PARASKEVOPOULOS

    Unfortunately, it makes a lot of noise after 60km

    Translated from Greek ·
    0
  • 5
    Miltos35

    0
  • See all

Description & Specifications

The wild combination of style and functionality makes the new Broozer from Bell a true road warrior. With dual certification for full-face and open-face riding, the removable chin guard, the integrated visor, and weighing only 1350g, the Broozer is ready for anything.

Features

  • NutraFog II anti-scratch visor with fog and UV protection
  • Energy management with dual-density EPS lining
  • Ventilation with adjustable air vents
  • Lightweight PC / ABS LG shell in 3 sizes
  • Glasses compatibility
  • DOT ECE certification (P/J)
  • Removable chin guard


SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Modular

Type

Modular

Modular helmets are a combination of a full-face and a jet helmet. They have a mechanism that opens the front part of the helmet, turning it into a jet helmet. They are easy to wear and safer than jet helmets, but less safe than full-face helmets as the helmet breaks into two pieces. The difference between them and Flip-Up helmets is that the lower part is completely removed and does not remain on the helmet. During driving, the front part of the helmet must be closed, and during stops, it can be lifted.
Weight (+/-50 gr)
1400 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Grey
Color Finish
-
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.05

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.05
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Glasses Holder
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (4)

4.3
4
4.3
Review this product
  1. 2
  2. 1
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Construction quality
  • Visibility
  • Weight
  • Application
  • Value for money
  • Ventilation
  • High aerodynamic noise
  • Dr.Feel
    4
    3 out of 14 members found this review helpful
    Dr.Feel

    Verified purchase

    Look, I bought it for riding in the city with my scooter because it goes up to 65 km/h. I never go over 50 in the city with my scooter and the helmet makes a lot of noise as it doesn't have proper ventilation at the back, but all helmets are like that, so you know what you're getting. It suits me well, it's lightweight with good viewing angles and looks nice. The fit is very good, it has a narrow size range. I was between the S and the M (actually, my size was half a size above the S) and I got the M and it was perfect.

    Translated from Greek ·
    • Application
    • Construction quality
    • Visibility
    • Weight
    • Value for money
    • Ventilation
    • High aerodynamic noise
    Did you find this review helpful?
  • Mark_Anastasiadis
    5
    20 out of 21 members found this review helpful
    Mark_Anastasiadis
    This review is about the colour: Black

    Bell includes both visors in the helmet package when you purchase it. (It is shown in all unboxing videos.) I didn't know this and also ordered the smoked one. However, they didn't send it to me and I wasn't charged the additional 28€ that it costs. Just for your information, for those who are interested.

    Translated from Greek ·
    • Application
    • Ventilation
    • Construction quality
    • Visibility
    • Weight
    • Value for money
    • Moderate aerodynamic noise
    Did you find this review helpful?
  • 3
    KONSTANTINOS PARASKEVOPOULOS

    Verified purchase

    This review is about the colour: Black

    Unfortunately, it makes a lot of noise after 60km

    Translated from Greek ·
    • Ventilation
    • Construction quality
    • Visibility
    • Weight
    • Application
    • Value for money
    • High aerodynamic noise
    Did you find this review helpful?
  • 5
    Miltos35
    This review is about the colour: Black

    • Application
    • Construction quality
    • Visibility
    • Weight
    • Value for money
    • Moderate aerodynamic noise
  • Dr.Feel
    4
    Dr.Feel

    Look, I bought it for riding in the city with my scooter because it goes up to 65 km/h. I never go over 50 in the city with my scooter and the helmet makes a lot of noise as it doesn't have proper ventilation at the back, but all helmets are like that, so you know what you're getting. It suits me well, it's lightweight with good viewing angles and looks nice. The fit is very good, it has a narrow size range. I was between the S and the M (actually, my size was half a size above the S) and I got the M and it was perfect.

    Translated from Greek ·
    3
  • Mark_Anastasiadis
    5
    Mark_Anastasiadis

    Bell includes both visors in the helmet package when you purchase it. (It is shown in all unboxing videos.) I didn't know this and also ordered the smoked one. However, they didn't send it to me and I wasn't charged the additional 28€ that it costs. Just for your information, for those who are interested.

    Translated from Greek ·
    20
  • 3
    KONSTANTINOS PARASKEVOPOULOS

    Unfortunately, it makes a lot of noise after 60km

    Translated from Greek ·
    0
  • 5
    Miltos35

    0
  • See all