I don't know if we were just unlucky, but when we pulled it and rotated it, it bent! It's a pity I didn't notice it from the beginning to return it...

Very sturdy construction, and especially the one with a single arm tends to touch the wall if you have a small space like in a room.

Overall, very good and stable construction. One very good thing is the wide base that, with the 6 screws, provides very good stability for the installation. 4 stars for the product. Minus one star because the base is quite heavy and if you want to install it high on the wall, it’s a problem. You will definitely need someone to help.

It doesn't work for a 65-inch TV at all. The single arm tilts due to weight constantly. I had to take down the TV and put another mount with a dual arm unfortunately. I think it's suitable for up to 50 inches and up to 15 kilograms.

Unacceptable stand. And on a Samsung QLED 55" 4K TV. The stand, even if you place it straight (leveling), has only one arm at the back, resulting in if you tilt it left-right, the initial settings of the stand are lost and the TV tilts! I tried a second time and got the same results! This issue with the single arm is mentioned by another friend as well! So I left it completely closed against the wall until I get a stable stand and can relax!

It is high quality and stable. It requires careful consideration of the height at which you will place it in order for the TV to sit at the desired height. Overall, if you are a bit careful with the installation, it is great. It is worth its money.

I bought and returned this specific stand.
I was disappointed because I was very satisfied with this company, but I didn't buy another stand (Brateck LPA49-463D) again because unfortunately it didn't support the VESA I wanted.
The reason, which I believe is also the cause, that some people like me gave a bad review, is that it has poor construction at the point where the VESA plate attaches.
The point where it is supported has incorrect holes, resulting in the settings being lost and the TV tilting when you move it to another position, even if you set it up correctly (using a level).
Because a picture is worth a thousand words, please see the photos I have uploaded.

Very good build quality with good calling and viewing options. I installed it on a wall with plasterboard. To make sure about the weight and stability, at the point where I had calculated to place the base, I added more screws so that several screws could hold it.

For a 40-inch TV on a side wall, it does a very good job. The size is suitable for folding the TV and when we are not using it, it does not take up space and looks like a frame.

Easy to install (with the screws included in the package), provides enough room for error correction in distances. Sturdy construction with movement in all directions and adjustable angle up and down with an Allen wrench. Definitely worth it for 24€.

Very good, it seems to withstand weight. It definitely requires a screwdriver for installation, otherwise you will struggle.

Under 30 euros it's a steal and it has a sturdy construction. Now, if you want, you can add metal hooks for even more secure placement

If you are going to buy a television and spend 1000€, it is better to put it on a stand or on a piece of furniture. Initially, I bought the stand, went home, and had to go back to the store (5€ for gas) to have it exchanged because it was crooked. You put the television on it and you want to take it off. First, I kicked one of the legs against the wall (maybe it's my fault) and then, as soon as you put the television on it, it starts wobbling from one side no matter how straight you try to put it, it shakes and loses stability. Then I tried to fix the screws and straighten it, but when I fixed it on one side, it broke on the other side and the screws opened (the critical screws are better). Both legs broke, so I either leave it like that after finally straightening it or I buy a new one and start over. You get what you pay for, wise words!

Whoever buys the stand before seeing their television may end up being fooled. This specific stand covers almost the entire back of the TV, resulting in no cable being easily accessible for installation in the corresponding socket, so be careful with your purchases

It looks very high-quality both in terms of materials and stability!! I installed it today and adjusted the position of my TV where I wanted it because the base gives you many options to either rotate it or tilt it. I don't know about its durability, if it's worth it, I hope I remember to come back in the future.

Flawless in all aspects. The only issue, like in all similar style bases, is that you need to be at least two people because it is difficult to mount the base with the TV on the wall or the TV on the base when the base is screwed onto the wall.

A little attention to how the cables will pass when the TV is installed. Value for money, very stable and good movement.

I was reading comments that it is very good, that it can hold the weight of a 55" TV, another person's 65". Mine is 42", so here we are. The box says it can hold from 37" to 70". I doubt if it can actually hold a 32". I tried installing it the right way, then upside down, still nothing! The stand leans downwards and cannot hold the TV all the way back (I should also mention that I am very familiar with installing such stands and had all the required tools). I went and bought another one for 10 euros and it was much better.

Very good choice of base. It took us a little time to install it, but overall everything is good. Sturdy, many options to customize it, and because the USB port is at the back, I constantly move it back and forth and it remains stable and comfortable.

I recommend it, for its price it is very good.

It is truly a perfect base.....full quality, very sturdy when I put it on my 50-inch TV. But the best part is that it has enough margin for error, for example, I made the holes slightly crooked and it leaned to the right, but you can easily fix it with the screws it has at the back....also, it has everything you will need inside the box.

Finally, the excellent ratings were reflected in practice. Very good product, excellent materials. All accessories are nicely organized. Stable and relatively easy to install. Rotates in all viewing angles. The 20E price is unexpectedly cheap, it is normally worth 50E+.

Just be careful with the installation on the wall, there is an arrow on the base for the up/down direction which is not easily visible in the instructions. Luckily, I installed it correctly by chance. The instructions could have been better overall

Very durable and sturdy construction. It allows for a wide viewing angle rotation on a 55" TV, like mine, even in a "difficult" placement spot (close to a corner of the wall). It is worth every penny and more!!!

Overall, for 20 euros it's ok. In no way do I consider it suitable for more than 55 inches, even though it claims to support up to 70. I installed a 65-inch Samsung QLED and the stand bent, even though it is within the weight specifications. Tilt doesn't work as it leaned forward as soon as I hung the TV, so it has a permanent tilt and cannot stand upright. Also, the two screws that support the central plate couldn't sit straight, so in my case, because the wall had a recess, I countered it and it sat straight, otherwise the TV would be crooked. Of course, all of this was with the arm folded, when extended the TV didn't sit straight and didn't inspire confidence, while everything on the wall was leveled with large screws. As I said at the beginning, decent for 20 euros, but if I need to buy a stand again, I won't choose this one, especially for TVs larger than 55 inches.