MAIN WATER SUPPLY FILTER MIGNON PLUS L-3P 1/2" MFO SX-AS (STRAIGHT SUPPLY)

The Mignon Plus water filters are typically installed in the main supply, for both domestic and industrial use.

Suitable for installation where space is limited.

Important note:

• A pressure reducer is recommended before installing each filter.
• During installation, use only Teflon tape.
• When changing the replacement part, clean the gasket of the glass, wipe it dry, apply lubricant (lubrikit), and reassemble.
• When the gasket is worn out, it needs to be replaced.
• The site photos may differ from the final product.

Made from non-toxic materials suitable for drinking water:

• Head/Fitting Material: Reinforced polypropylene.
• Glass Material: SAN.
• Air Release Valve (Duplex filter): Polypropylene.
• With brass or plastic threading.
• Sealing & Valve Gasket: EPDM.
• Inlet/Outlet Threads: Brass CW 617 N.
• Equipped with an air release valve for easy filter replacement.

5” height and 1/2” supply.

Single and double devices with transparent glass and replacements from 1μm to 70μm to choose from.

Can also be installed at an angle up to 45 degrees (those with fittings).

Maximum operating pressure: 8 bar (116psi), provided the pressure is stable.

Maximum operating temperature: 45°C.

Minimum operating temperature: 4°C.

Install in a shady and bright place.