28/12/25
The thermostat has been working for a second year with very good results....I read that the temperature dial breaks....We must say that the thermostat is not a toy, to be adjusting the dial all the time.....I have set it to one temperature and that's it....And the few times I needed a higher temperature, everything was fine..I also changed the batteries at the start of the season and everything is ok. It is a cheap and good thermostat.
For the price, it is perfect..I replaced a Siemens with an algorithm that worked whenever it wanted....This one is very effective....You set the temperature you want and as soon as it reaches it, it turns off...As soon as it drops 0.2 degrees, it turns on again....A little attention is needed when the batteries need to be changed....Very easy connection...It’s worth it.
For those who have trouble changing the batteries, there is a way to avoid it....You get a small power supply that outputs 3 volts and connect it to the battery contacts, paying attention to the polarity plus and minus..and you are ready...no more batteries and no more hassle opening the thermostat...
CALIBRATION
We do as follows....Hold the set button for a few seconds..as soon as it enters the nod icon..press set again and hold it until the call icon appears and then adjust accordingly the plus and minus.....
28/12/25
Ο θερμοστάτης δουλεύει δεύτερη χρονιά με πολύ καλά αποτελέσματα....Διαβάζω ότι χαλάει η ροδέλα της θερμοκρασίας....Πρέπει να πούμε ότι ο θερμοστάτης δεν είναι παιχνίδι ,κάθε λίγο και λιγάκι να ρυθμίζουμε τη ροδέλα.....Εγώ τον έχω βάλει σε μια θερμοκρασία και τέρμα....Και όσες φορές (λίγες) χρειάστηκα παραπάνω θερμοκρασία ολα μια χαρά ..Του άλλαξα και μπαταρίες αρχή της σεζόν και όλα οκ.Ειναι ένας φθηνός και καλός θερμοστάτης
Για τη τιμή που έχει είναι τέλειος ..Αντικατέστησα έναν siemens με αλγόριθμο που όποτε ήθελε δούλευε....Ο συγκεκριμένος είναι πολύ αποτελεσματικός....Βάζεις τη θερμοκρασία που θες και μόλις τη φτάσει κλείνει...Μόλις πέσει 0,2 βαθμους δίνει εντολή ξανά....Λίγη προσοχή θέλει όταν πρέπει να αλλαχτούν οι μπαταρίες ....Πανευκολη σύνδεση...Αξίζει..
Όσοι δυσκολεύεστε με την αλλαγή των μπαταριών υπάρχει ένας τρόπος να την αποφύγετε....Παίρνετε ένα μικρό τροφοδοτικό που να βγάζει τάση 3 volt. και το ενώνεται στις επαφές των μπαταριών προσέχοντας την πολικότητα συν πλην ..και είστε έτοιμοι...και τέρμα οι μπαταρίες και η ταλαιπωρία για το άνοιγμα του θερμοστάτη...
ΚΑΛΙΜΠΡΑΡΙΣΜΑ
Κάνουμε ως εξής....Κρατάμε το set πατημένο καποια δευτερόλεπτα..μόλις μπει στο εικονίδιο nod..ξαναπαταμε το set και το κρατάμε πατημένο μέχρι να εμφανιστεί το εικονίδιο call και κατόπιν ρυθμίζουμε ανάλογα το συν και το πλην .....