It looks very high quality, it fit perfectly and very securely, just so you know, the bakelite is colder than plastic and in winter this bothers you when you sit

although I haven't opened it yet, from the packaging it seems that it doesn't have ready fittings to screw in like the one I bought last time... maybe a plumber could install it but without one I definitely wouldn't manage...

The product looks good and durable, but its screws have a problem. Fortunately, I managed to use the ones I already had. The packaging was also slightly opened, but the product arrived intact.

It didn't fit well, and it also has an issue with tightening.

Let's say it's due to user error and I give it a 3.

Very fake, it comes off immediately from its place since it is supported by some rubber bands! Not suitable for overweight and hyperactive people! If you move even a little, you end up holding it in your arms

On a toilet bowl where it is difficult to find a lid that fits, this one fit perfectly. The installation was a bit tricky until you center it, but with a little patience you get it right.

It fit quite well on our toilet. To secure it properly, I had to use an extra washer. It seems well made, time will tell if it lasts. I didn't like the spot where the button to release it is, nor the complexity of the installation mechanism; I believe it will collect dirt (from my little man's missed shots) and will start to smell.

The lid broke after 2 weeks of use. It may look nice because it's thin but it's completely fake. Wasted money.

Simply perfect. The screws on the uppers take a long time to screw in until they tighten. As you screw in the upper, it thickens and thus the screw tightens.

Amazing lid, very good quality! Nothing like those from the store that you buy by the kilo! Every year I used to change lids! With this one, I saved a semester with lids over €60!

For the price, it's the best thing available! It has a slow-closing system both on the lid and the base, and a system that allows you to remove it completely from its base with two buttons for washing, etc. Its installation is much easier than the common lids that require you to place the nut from the underside of the toilet bowl. With a screwdriver and slightly screwed in the screw on the rubber, you gently tap and pass the rubber rings to the base of the toilet bowl. It can be adjusted forward, backward, left, and right to fit any toilet bowl.

The issue of the dimensions that many mention is something that requires attention. For stabilization, it needs good screwing and does not move at all.

Although the measurements are correct, unfortunately, there is no adjustment option on the tile like there is on the others, resulting in it not fitting properly with the toilet.

Just as the bowl needed. Whoever knows how to put it will have no problem starting to move.

Regardless of what everyone says, it has very good stability. It's just that the mechanism is such that the screw must be tightened all the way. Essentially, the nut that is inside the silicone needs to be screwed in until it reaches the top. The holes were difficult to fit into, but I pushed them in with a screwdriver. The quality of the lid is very good and overall very economical.

For a temporary, economical solution it's good, but that's about it. It wobbles and doesn't screw in properly.
A few months after buying it, we threw it away and bought another one for the same money because it wasn't stable at all and despite the fixes we tried, it still didn't screw in properly

Good quality. Not wow, but well-made. The brake works well. In this specific 1020, one problem is that the sides are somewhat thin, so it's not very comfortable for sitting. I think a heavier person will have an issue.
Now for the installation. I believe it's a matter of the toilet bowl. I installed two, in Ideal from the '80s and '90s. In the older one, it wouldn't fit at all. I ruined the gaskets with a knife, climbed on top to push it in, sweated, even used soap. Finally, after a lot of struggle, it went in and seems to be stable. In the newer one, it went in within five minutes. The difference? The holes in the old one are a bit smaller, and they have a depth of 2+ male fingers. In the newer one, the depth is 1 finger, at most. So, check the depth of the hole (sorry for the expression) and may God help you.

Very good quality and durability over time (I've had it for 3.5 years and it's like new). The only downside I could mention is that the slowing mechanism has loosened a bit after some years.

It's good, but one quick release is broken and it's permanently unlocked (it has two easy removal buttons for easy washing) it's okay in place, it doesn't move or anything

Very good plastic cap. It has screws that are easy to install. It adjusts easily and has a good price. Purchased for €23 with shipping.

Good quality but difficult to install, if you don't put it correctly at first, it goes bad, meaning the screws and contacts get damaged.

The build quality is great, worth the money. Now, in the first bowl I was lucky, it went in easily, the mechanism fit, all good. In the second one, I struggled and after two hours I hadn't achieved much. I had to make a cut in the rubber with a knife to reduce the thickness and make them pass through the hole. The left one barely passed, the right one barely fit. And of course, the bowl is not stable.

Good so far but the attachment system to the toilet bowl is useless. One must make a patent. I wonder about the manufacturing factory.

FINALLY! After 4 failed purchases in the range of 30-60€, I bought the "cheap" cap....
It has very good supports (rare) which are also easy to install. Quick, easy, and sturdy. The cap easily goes in and out of the supports with a button, and the supports can also be easily disassembled (if needed).
The length is adjustable (approximately 3-5cm) so it covers in case you choose the wrong length.

Although it appears to be a hard material, I would not say it is durable at all. After coming into contact with chlorine, it became dull and had some orange stains that do not come off no matter what. I do not recommend it under any circumstances! It barely lasted 1 year. Money wasted...

Very good construction and stable... It doesn't move, the most important thing is that it's made of bakelite and the placement is very clever without having to bend down to find the hole, the whole placement is done from above...

Very good product and excellent assembly, I really wonder about the bad reviews, I would say they are rather suspicious..

Perfect quality-price ratio. I had concerns after reading comments mentioning difficulty with installation, however personally I did not encounter any issues whatsoever. I would buy it again!

It needs an angle greater than 90 degrees to prevent it from falling. It's a lot of hassle for nothing, it should not have soft close. As a construction, it is of good quality, but what can you do with it?

What our other friends wrote here is true.
Good quality, very nice soft close.
However, it doesn't deserve an excellent rating because the system with the rubber supports is bad.
One went in on the first try and stayed still as it should. I thought, give it another 5 minutes and I'll put in the other one.
Little did I know... After 2-3 hours, I understood what our friends were saying.
The solution I chose was to take the long plastic screw from the old lid and tighten it with the old plastic clip.
It's a shame for such a good product to be ruined by such a failed support system.