Skroutz.mt

Fibaro Roller Shutter 3 Smart Intermediate Switch Wi-Fi & Z-Wave
Intermediate Switches

Fibaro Roller Shutter 3 Smart Intermediate Switch Wi-Fi & Z-Wave Code: FGR-223

Key features:

  • Connectivity: Z-Wave
  • Suitable for Blinds

  • Connectivity

    Z-Wave

    Reliable wireless connectivity technology with zero interference.

    Wi-Fi

    The most common connectivity option for individual switches, as it connects directly to the router.

  • Usage

    Lighting

    For remote control of lamps and lighting fixtures.

    Roller shutters

    They allow remote control (up/down movement) of electric shutters and awnings.

    Garage door

    They allow remote control (opening and closing) of garage doors.

  • Maximum Load

    It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

    For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.

  • Power Measurement

    It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.
  • Dimensions 42x37x17mm
  • See all
Product report

Specifications

Specifications

Product Number
FGR-223

Specifications

Switch Type
Smart Switch
Usage
Lighting, Roller shutters, Garage door

Usage

Lighting

For remote control of lamps and lighting fixtures.

Roller shutters

They allow remote control (up/down movement) of electric shutters and awnings.

Garage door

They allow remote control (opening and closing) of garage doors.
Dimensions (Spec Summary)
42x37x17mm

Smart Attributes

Connectivity
Z-Wave, Wi-Fi

Connectivity

Z-Wave

Reliable wireless connectivity technology with zero interference.

Wi-Fi

The most common connectivity option for individual switches, as it connects directly to the router.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
4.3 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Pieces
1

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
Yes

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Spyros_Kallioypis
    5
    2 out of 2 members found this review helpful
    Spyros_Kallioypis

    Verified purchase

    It is the best when it comes to roller control relays... the best!!! I use it with home assistant, I have 6 of them, 1 for each roller, it has never betrayed me, it has never stuck, it has never had any problematic behavior.. generally, zwave products, for those who understand, are far superior to zigbee and obviously to wifi, which involves the router and there is a slight delay.
    You should know that the socket where you will place it must have specifications.
    1) It needs a 7 cm box, otherwise it won't fit behind the physical switch.
    2) It needs to reach the phase and neutral in the box... 99% of the boxes only have the phase, as the neutral goes directly to the roller motor...
    So it is a very good choice for someone who is renovating or building a house now, because even the 7 cm box requires digging and plastering.
    If you are looking for a solution for an existing house, it can be placed next to the motor if the wall allows gaps and there is access, or inside the roller.
    It is generally more difficult without specifications.

    Translated from Greek ·
    Did you find this review helpful?
  • Spyros_Kallioypis
    5
    Spyros_Kallioypis

    It is the best when it comes to roller control relays... the best!!! I use it with home assistant, I have 6 of them, 1 for each roller, it has never betrayed me, it has never stuck, it has never had any problematic behavior.. generally, zwave products, for those who understand, are far superior to zigbee and obviously to wifi, which involves the router and there is a slight delay.
    You should know that the socket where you will place it must have specifications.
    1) It needs a 7 cm box, otherwise it won't fit behind the physical switch.
    2) It needs to reach the phase and neutral in the box... 99% of the boxes only have the phase, as the neutral goes directly to the roller motor...
    So it is a very good choice for someone who is renovating or building a house now, because even the 7 cm box requires digging and plastering.
    If you are looking for a solution for an existing house, it can be placed next to the motor if the wall allows gaps and there is access, or inside the roller.
    It is generally more difficult without specifications.

    Translated from Greek ·
    2
  • See all

Specifications

Product Number
FGR-223

Specifications

Switch Type
Smart Switch
Usage
Lighting, Roller shutters, Garage door

Usage

Lighting

For remote control of lamps and lighting fixtures.

Roller shutters

They allow remote control (up/down movement) of electric shutters and awnings.

Garage door

They allow remote control (opening and closing) of garage doors.
Dimensions (Spec Summary)
42x37x17mm

Smart Attributes

Connectivity
Z-Wave, Wi-Fi

Connectivity

Z-Wave

Reliable wireless connectivity technology with zero interference.

Wi-Fi

The most common connectivity option for individual switches, as it connects directly to the router.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
4.3 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Pieces
1

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
Yes

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Spyros_Kallioypis
    5
    2 out of 2 members found this review helpful
    Spyros_Kallioypis

    Verified purchase

    It is the best when it comes to roller control relays... the best!!! I use it with home assistant, I have 6 of them, 1 for each roller, it has never betrayed me, it has never stuck, it has never had any problematic behavior.. generally, zwave products, for those who understand, are far superior to zigbee and obviously to wifi, which involves the router and there is a slight delay.
    You should know that the socket where you will place it must have specifications.
    1) It needs a 7 cm box, otherwise it won't fit behind the physical switch.
    2) It needs to reach the phase and neutral in the box... 99% of the boxes only have the phase, as the neutral goes directly to the roller motor...
    So it is a very good choice for someone who is renovating or building a house now, because even the 7 cm box requires digging and plastering.
    If you are looking for a solution for an existing house, it can be placed next to the motor if the wall allows gaps and there is access, or inside the roller.
    It is generally more difficult without specifications.

    Translated from Greek ·
    Did you find this review helpful?
  • Spyros_Kallioypis
    5
    Spyros_Kallioypis

    It is the best when it comes to roller control relays... the best!!! I use it with home assistant, I have 6 of them, 1 for each roller, it has never betrayed me, it has never stuck, it has never had any problematic behavior.. generally, zwave products, for those who understand, are far superior to zigbee and obviously to wifi, which involves the router and there is a slight delay.
    You should know that the socket where you will place it must have specifications.
    1) It needs a 7 cm box, otherwise it won't fit behind the physical switch.
    2) It needs to reach the phase and neutral in the box... 99% of the boxes only have the phase, as the neutral goes directly to the roller motor...
    So it is a very good choice for someone who is renovating or building a house now, because even the 7 cm box requires digging and plastering.
    If you are looking for a solution for an existing house, it can be placed next to the motor if the wall allows gaps and there is access, or inside the roller.
    It is generally more difficult without specifications.

    Translated from Greek ·
    2
  • See all
63,92 €
14,00 €   shipping cost