Skroutz.mt

Milwaukee M12 FQID-202X Battery Impact Screwdriver 10.8V 2x2Ah
Power Drill Drivers & Screwdrivers

Milwaukee M12 FQID-202X Battery Impact Screwdriver 10.8V 2x2Ah

M12 FQID-202X Impact Driver 1/4" (2x2Ah)

Features

  • Voltage: 12 V
  • Battery type: Li-ion
  • Battery capacity: 2.0 Ah
  • No-load speed: 0-3200 rpm
  • Impact rate: 0-3400 ipm
  • Max screw diameter: M14
  • Max torque: 50...

M12 FQID-202X Impact Driver 1/4" (2x2Ah)

Features

  • Voltage: 12 V
  • Battery type: Li-ion
  • Battery capacity: 2.0 Ah
  • No-load speed: 0-3200 rpm
  • Impact rate: 0-3400 ipm
  • Max screw diameter: M14
  • Max torque: 50 Nm
  • Weight with battery: 1.1 Kg

Description

  • M12 FUEL SURGE ″ x Hex, the quietest 12V impact driver from Milwaukee Tool.
  • FLUID-DRIVE hydraulic drive system that...
See full description See full description

Top specs

  • Power Supply

    Battery

    Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
  • Number of Batteries 2

  • Speed Setting

    Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)

  • Voltage

    It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

  • Battery Capacity

    The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

  • Maximum Motor Speed

    The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.

  • Torque Setting

    The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).

  • Impact

    The impact function provides high power to easily and quickly complete even the most demanding tasks.
  • See all

Battery voltage

  1. 10.8 V

    from 290,00 €

  2. 12 V

    from 210,89 €

Contents kit

  1. 2x2Ah with Hard Case

    from 290,00 €

  2. Solo

    from 210,89 €

290 00 €
Delivery by Thu, 10 Sep
14,00 €   shipping cost
Sent from Greece
From MdTools 5.0 (45)
5.0 (45 reviews)
Greece
2 pieces
See Power Tools on the page of MdTools

Learn more about invoicing
Review the product
Product report

Description

Description

M12 FQID-202X Impact Driver 1/4" (2x2Ah)

Features

  • Voltage: 12 V
  • Battery type: Li-ion
  • Battery capacity: 2.0 Ah
  • No-load speed: 0-3200 rpm
  • Impact rate: 0-3400 ipm
  • Max screw diameter: M14
  • Max torque: 50 Nm
  • Weight with battery: 1.1 Kg

Description

  • M12 FUEL SURGE ″ x Hex, the quietest 12V impact driver from Milwaukee Tool.
  • FLUID-DRIVE hydraulic drive system that reduces metal-to-metal contact.
  • The 4-mode DRIVE CONTROL allows the user to switch to four different speed and torque settings.
  • The POWERSTATE brushless motor provides consistent power output.
  • The REDLINK PLUS intelligence system provides digital overload protection.
  • The REDLITHIUM-ION battery pack offers superior pack construction and longer run time.
  • X ″ Hex chuck for quick and easy bit changes.
  • Works with all MILWAUKEE® M12 batteries.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Impact Screwdriver

Type

Impact Screwdriver

Suitable for fast screwing and unscrewing even in the hardest building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

Battery Features

Number of Batteries
2
Battery Voltage
10.8 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
2 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.
Secondary Battery Charge Ah
2 Ah
Compatible Battery Type
Milwaukee M12

Compatible Battery Type

The type of battery that can be installed in the tool.

Features & Functions

Maximum Motor Speed
3200 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
50 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
3400 bpm
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
Yes

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
No
Reception
Hexagon
Net Weight
900 gr
Weight (with Battery)
1100 gr

Extra Features

Carrying Case
Hard Case

Carrying Case

Hard Case
Delivered with a hard carrying case.
Handle Included
No
Integrated Light
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

M12 FQID-202X Impact Driver 1/4" (2x2Ah)

Features

  • Voltage: 12 V
  • Battery type: Li-ion
  • Battery capacity: 2.0 Ah
  • No-load speed: 0-3200 rpm
  • Impact rate: 0-3400 ipm
  • Max screw diameter: M14
  • Max torque: 50 Nm
  • Weight with battery: 1.1 Kg

Description

  • M12 FUEL SURGE ″ x Hex, the quietest 12V impact driver from Milwaukee Tool.
  • FLUID-DRIVE hydraulic drive system that reduces metal-to-metal contact.
  • The 4-mode DRIVE CONTROL allows the user to switch to four different speed and torque settings.
  • The POWERSTATE brushless motor provides consistent power output.
  • The REDLINK PLUS intelligence system provides digital overload protection.
  • The REDLITHIUM-ION battery pack offers superior pack construction and longer run time.
  • X ″ Hex chuck for quick and easy bit changes.
  • Works with all MILWAUKEE® M12 batteries.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Impact Screwdriver

Type

Impact Screwdriver

Suitable for fast screwing and unscrewing even in the hardest building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

Battery Features

Number of Batteries
2
Battery Voltage
10.8 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
2 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.
Secondary Battery Charge Ah
2 Ah
Compatible Battery Type
Milwaukee M12

Compatible Battery Type

The type of battery that can be installed in the tool.

Features & Functions

Maximum Motor Speed
3200 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
50 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
3400 bpm
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
Yes

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
No
Reception
Hexagon
Net Weight
900 gr
Weight (with Battery)
1100 gr

Extra Features

Carrying Case
Hard Case

Carrying Case

Hard Case
Delivered with a hard carrying case.
Handle Included
No
Integrated Light
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

290,00 €
14,00 €   shipping cost