Skroutz.mt

Gardena Auto 5900/4 Single-phase Pump Well 1.2hp 1771-20 967975401
Submersible Water Pumps

Gardena Auto 5900/4 Single-phase Pump Well 1.2hp 1771-20 967975401

Key features:

  • Maximum pump immersion: 12m
  • Maximum wastewater temperature: 35 °C
  • Performance: 5900 lit/h
  • Power: 900W
  • Maximum pressure: 3.5 bar
  • Maximum discharge height: 35 m
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    35

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all

User Manual

The product is not available for shipping to the selected country.
Product report

Description

Description

The GARDENA 5900/4 inox Submersible Pump offers an efficient and effective solution for all your irrigation needs. Ideal for high-pressure and almost silent watering from wells and tanks, the pump provides the complete package for hassle-free water pumping even from great depths.

Powerful and Strong

The submersible pump is very powerful, with a 3-stage hydraulic system for easy water pumping from wells or tanks. This way, you can simultaneously use multiple micro-sprinklers or up to 3 large sprinklers without any issues.

Automatic operation

Allows for the most efficient and environmentally friendly irrigation thanks to the automatic shut-off function.

The pump starts immediately and stops completely after the water pumping is completed - automatically. This saves water and energy and is essential for domestic water supply. Even automatic watering in combination with an irrigation computer is possible. With leak detection for protection against water damage and a small quantity program for operating a drip irrigation system.

Robust stainless steel construction

Quality components ensure quality tools. The body and the connection thread are made of solid stainless steel.

Built-in mesh filter

Thanks to the integrated and easily accessible fine mesh filter, the pump is protected from potential clogs. Cleaning the filter is particularly easy.

Suction using a floating pipe

If you remove the filter, there is the option to connect an optional floating system, to which the suction hose is connected, so that the suction is done from the surface of the water. In this way, the use of the pump in tanks or wells with sediments at the bottom is possible without problems.

Long power cord and retention rope

This pump features a 15m power cord and a durable 20m holding rope. Therefore, deeper wells, with a depth of up to 12 meters, are not a problem.

Ideal for connecting with AquaZoom surface sprinklers

This pump can be easily connected to GARDENA's AquaZoom surface sprinklers, as well as many others. This way, your garden is always kept watered.

Compatible with irrigation programmers

Thanks to the automatic operation, fully automatic operation with a watering timer is possible

Specifications

  • Power: 900 W
  • Maximum pumping capacity: 5900 l/h
  • Maximum pressure: 3.5 bar
  • Maximum submersion depth: 12m
  • Maximum delivery height: 35m
  • Maximum liquid temperature: 35 °C
  • Cable length: 15m
  • Electrical protection category: IP X8

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.2 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
900 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
12 m

Features

Electronic Level Sensor
Yes

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
35 m

Maximum Head Height: 35


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
5 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
12 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

1.5
2
1.5
Review this product
  1. 5 stars
    0
  2. 4 stars
    0
  3. 3 stars
    0
  4. 1
  5. 1
Review this product

Reviews by our members

  • thanos_78
    1
    2 out of 2 members found this review helpful
    thanos_78

    The pump purchased on 8/23 from a central store in Athens, and in less than a year it rusted and has a leak, releasing the escape relay. It was used in a well in a seaside house. At the point where rust is visible, it also lost water during its operation. Money wasted.

    Translated from Greek ·
    Did you find this review helpful?
  • naylar
    2
    3 out of 3 members found this review helpful
    naylar

    Verified purchase

    Awesome tool with incredible power.
    EDIT: After less than 2 years, it developed moisture and rust INSIDE the pump. Obviously, it is not covered by the warranty

    Translated from Greek ·
    Did you find this review helpful?
  • thanos_78
    1
    thanos_78

    The pump purchased on 8/23 from a central store in Athens, and in less than a year it rusted and has a leak, releasing the escape relay. It was used in a well in a seaside house. At the point where rust is visible, it also lost water during its operation. Money wasted.

    Translated from Greek ·
    2
  • naylar
    2
    naylar

    Awesome tool with incredible power.
    EDIT: After less than 2 years, it developed moisture and rust INSIDE the pump. Obviously, it is not covered by the warranty

    Translated from Greek ·
    3
  • See all

Description & Specifications

The GARDENA 5900/4 inox Submersible Pump offers an efficient and effective solution for all your irrigation needs. Ideal for high-pressure and almost silent watering from wells and tanks, the pump provides the complete package for hassle-free water pumping even from great depths.

Powerful and Strong

The submersible pump is very powerful, with a 3-stage hydraulic system for easy water pumping from wells or tanks. This way, you can simultaneously use multiple micro-sprinklers or up to 3 large sprinklers without any issues.

Automatic operation

Allows for the most efficient and environmentally friendly irrigation thanks to the automatic shut-off function.

The pump starts immediately and stops completely after the water pumping is completed - automatically. This saves water and energy and is essential for domestic water supply. Even automatic watering in combination with an irrigation computer is possible. With leak detection for protection against water damage and a small quantity program for operating a drip irrigation system.

Robust stainless steel construction

Quality components ensure quality tools. The body and the connection thread are made of solid stainless steel.

Built-in mesh filter

Thanks to the integrated and easily accessible fine mesh filter, the pump is protected from potential clogs. Cleaning the filter is particularly easy.

Suction using a floating pipe

If you remove the filter, there is the option to connect an optional floating system, to which the suction hose is connected, so that the suction is done from the surface of the water. In this way, the use of the pump in tanks or wells with sediments at the bottom is possible without problems.

Long power cord and retention rope

This pump features a 15m power cord and a durable 20m holding rope. Therefore, deeper wells, with a depth of up to 12 meters, are not a problem.

Ideal for connecting with AquaZoom surface sprinklers

This pump can be easily connected to GARDENA's AquaZoom surface sprinklers, as well as many others. This way, your garden is always kept watered.

Compatible with irrigation programmers

Thanks to the automatic operation, fully automatic operation with a watering timer is possible

Specifications

  • Power: 900 W
  • Maximum pumping capacity: 5900 l/h
  • Maximum pressure: 3.5 bar
  • Maximum submersion depth: 12m
  • Maximum delivery height: 35m
  • Maximum liquid temperature: 35 °C
  • Cable length: 15m
  • Electrical protection category: IP X8

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.2 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
900 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
12 m

Features

Electronic Level Sensor
Yes

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
35 m

Maximum Head Height: 35


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
5 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
12 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

1.5
2
1.5
Review this product
  1. 5 stars
    0
  2. 4 stars
    0
  3. 3 stars
    0
  4. 1
  5. 1
Review this product

Reviews by our members

  • thanos_78
    1
    2 out of 2 members found this review helpful
    thanos_78

    The pump purchased on 8/23 from a central store in Athens, and in less than a year it rusted and has a leak, releasing the escape relay. It was used in a well in a seaside house. At the point where rust is visible, it also lost water during its operation. Money wasted.

    Translated from Greek ·
    Did you find this review helpful?
  • naylar
    2
    3 out of 3 members found this review helpful
    naylar

    Verified purchase

    Awesome tool with incredible power.
    EDIT: After less than 2 years, it developed moisture and rust INSIDE the pump. Obviously, it is not covered by the warranty

    Translated from Greek ·
    Did you find this review helpful?
  • thanos_78
    1
    thanos_78

    The pump purchased on 8/23 from a central store in Athens, and in less than a year it rusted and has a leak, releasing the escape relay. It was used in a well in a seaside house. At the point where rust is visible, it also lost water during its operation. Money wasted.

    Translated from Greek ·
    2
  • naylar
    2
    naylar

    Awesome tool with incredible power.
    EDIT: After less than 2 years, it developed moisture and rust INSIDE the pump. Obviously, it is not covered by the warranty

    Translated from Greek ·
    3
  • See all