Description
Specifications
Berling Gel wood stain has a gel consistency and is suitable for interior and exterior wooden surfaces. When applied with a brush or roller, it becomes fluid, penetrates the wood and forms a thin film with a slightly satin finish. It contains UV absorbers, waxes and water-repellent additives, while allowing the wood to breathe.
Apply undiluted to dry, clean wood in two coats. Previously varnished surfaces should be sanded and thoroughly cleaned. Clean tools with soap and water.
- Type: Penetrating wood stain
- Shade: Oregon
- Quantity: 2.5 L
- Application surface: Wood
- Use: Interior and exterior
- Consistency: Gel
- Finish: Slightly satin
- Dilution: Do not dilute
- Application: Apply with a brush or roller in 2 coats
- Coverage: 10–12 m²/L, depending on the type and absorbency of the wood
- Touch dry: 1–2 hours
- Recoating time: 8 hours
- VOC content: Up to 70 g/L
- Density: 1.03 ± 0.02 g/cm³
- Type
- Impregnation Varnish
- Surface Material
- of Wood
- Glossiness
- Light Satin
- Insecticide / Antifungal
- No
- Diluting Agent
- Water
- Polyurethane
- No
- 2-Component
- No
- Quantity
- 2.5 lt
- Colour
- Oregon
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.