The Hager SBN463 four-pole switch disconnector is used to open and close circuits under load, as well as to isolate them. It is suitable for mixed resistive and inductive loads, and features an LED status indicator and a mechanical contact indicator in green and red.
It can be locked in both the ON and OFF positions using the MZN175 accessory. The terminals are covered to provide IP2X protection.
- Number of poles: 4
- Neutral position: Without neutral
- Type: General purpose
- Rated operational voltage: 400 V
- Rated insulation voltage: 440 V
- Rated impulse withstand voltage: 6000 V
- Rated current: 63 A
- Frequency: 50–60 Hz
- Utilization category: AC22A
- Supply type: AC
- Protection rating: IP2X
- NO contacts: 4
- NC contacts: 0
- Status indicator: LED indicator
- Mechanical contact indication: Green and red
- Locking capability: In the ON and OFF positions using the MZN175
- Flexible conductor cross-section: 2.5–16 mm²
- Rigid conductor cross-section: 2.5–25 mm²
- Rated tightening torque: 2.8 Nm
- Operating temperature: -20 to 70 °C
- Mechanical operations: 60000 cycles
- Height: 83 mm
- Width: 70 mm
- Depth: 69 mm
Specifications
- Panel Switches Type
- General Use
- Number of Poles
- 4
- Nominal Voltage
- 400 V
- Rated Voltage
- 63 A
Features & Functions
- WiFi
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.