Chrotech Florex two-component surface varnish is applied to wooden floors and indoor woodwork. It leaves a colorless, satin finish that is resistant to scratches, water, and cleaning solutions.
Apply undiluted in two coats using a brush or felt roller. Mix the components in a 1:1 ratio by volume. Coverage per coat is 8.5 ± 1 m²/L, depending on the type of wood. The mixture has a pot life of 3.5 ± 0.5 hours at 20 °C and 2 ± 0.5 hours at 30 °C. It dries in 50 ± 10 minutes, and can be recoated after 24 hours. Clean tools immediately after application with thinner.
- Type: Surface varnish
- Components: 2
- Application surface: Wood
- Use: Wooden floors and indoor woodwork
- Color: Colorless
- Finish: Satin
- Volume: 2 L
- Application method: Brush or felt roller
- Coats: 2
- Mixing ratio: 1:1 by volume
- Dilution: Do not dilute
- Pot life: 3.5 ± 0.5 hours at 20 °C and 2 ± 0.5 hours at 30 °C
- Drying time: 50 ± 10 minutes
- Recoating time: 24 hours
- Coverage: 8.5 ± 1 m²/L per coat
- Tool cleaning: Clean with thinner immediately after application
- Type
- Surface Varnish
- Surface Material
- of Wood
- Glossiness
- Satin
- Insecticide / Antifungal
- No
- Polyurethane
- No
- 2-Component
- Yes
- Quantity
- 2 lt
- Colour
- Colorless
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.