Water-soluble clear polyurethane-based one-component floor varnish suitable for use on parquet, floors, and stairs in interior spaces. It has excellent spreadability, does not yellow, is highly hard, and has great resistance to abrasion, scratching, water, and cleaning liquids.

• Water-soluble clear one-component polyurethane varnish
• Suitable for use on parquet, floors, and stairs, from new or old wood, in interior spaces
• Excellent spreadability, does not yellow, and dries quickly
• Great resistance to abrasion, scratching, water, and cleaning liquids

Available in clear glossy and satin finish.

Preparation: Surfaces must be dry and free of dust, waxes, oils, and the old floors well sanded. First, two coats of Water Floor Primer are applied, and the surface is lightly sanded with fine sandpaper.

Application: The product is stirred well before use. Apply in two coats with a roller or brush with 5% thinning with water. It should not be applied at temperatures lower than 5°C, higher than 35°C, and/or relative humidity above 80%. It is dry to the touch in 1-2 hours and can be recoated after 6-8 hours after sanding. These times vary depending on weather conditions (relative humidity and temperature). Tools are cleaned immediately after use with water and if necessary with soap or detergent.

Health Safety & Environmental Protection: Keep out of reach of children. Avoid release into the environment. In case of ingestion: Call the POISON CENTER or a doctor immediately if you feel unwell. Contains 1,2-benzisothiazol-3(2H)-one. May cause an allergic reaction.