Interior & Exterior House Paints

Vitex Metallico decorative Plastic Paint for Interior and Exterior Use 520 Helios 700ml

Vitex Metallico 520 Helios decorative plastic paint is water-soluble, based on acrylic resins and metallic pigments, and creates a metallic finish. It can be applied to interior and exterior surfaces,...

Vitex Metallico 520 Helios decorative plastic paint is water-soluble, based on acrylic resins and metallic pigments, and creates a metallic finish. It can be applied to interior and exterior surfaces, such as walls, ceilings, plasterboard, wood, plastic and metal, after suitable preparation. It has a low odour during application and contains no ammonia,...

See Description & Specifications See Description & Specifications
The product is not available for shipping to the selected country.

Reviews (2)

Reviews

  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

Vitex Metallico 520 Helios decorative plastic paint is water-soluble, based on acrylic resins and metallic pigments, and creates a metallic finish. It can be applied to interior and exterior surfaces, such as walls, ceilings, plasterboard, wood, plastic and metal, after suitable preparation. It has a low odour during application and contains no ammonia, aromatic hydrocarbons, free formaldehyde, heavy metals or alkylphenol ethoxylates.

Stir well before use and apply in two coats using a roller, brush or airless spray gun, diluted with up to 10% water. It is touch-dry in 1–2 hours and can be recoated after 6–8 hours. Do not apply at temperatures below 5 °C or above 35 °C, or at a relative humidity above 80%. Painted surfaces can be washed after at least three weeks using a soft sponge and water; for stubborn stains, a mild, colourless detergent may be used. Clean tools immediately after use with water and, if necessary, soap or detergent.

  • Use: Interior and exterior
  • Quantity: 700 ml
  • Colour: Yellow (520 Helios)
  • Finish: Metallic
  • Base: Acrylic resins and metallic pigments
  • Dilution: Up to 10% with water
  • Application: Two coats using a roller, brush or airless spray gun
  • Touch-dry: 1–2 hours
  • Recoating: After 6–8 hours
  • Application temperature: From 5 °C to 35 °C
  • Maximum application relative humidity: 80%
  • Odour: Low during application
  • Ammonia content: None

Manufacturer

Usage
Interior, Exterior
Quantity
0.7 lt
Colour
Yellow

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product