Description
Specifications
ER-LAC S-86 Marine Top Coat is a two-component topcoat for boat surfaces above the waterline. Its formula contains UV filters and a modified resin that does not yellow over time. It can be applied to wood, metal, polyester and carbon, while aluminium, stainless steel and plastic require a bonding primer beforehand.
Suitable for indoor and outdoor use, it resists salt, moisture, sunlight, abrasion and chemicals. It can be applied by brush, roller or spray gun and, once dry, forms a smooth, even surface. It is not an antifouling paint.
- Type: Two-component topcoat
- Colour: White
- Sheen: Satin
- Volume: 1.5 L
- Use: Indoor and outdoor
- Suitable surfaces: Wood, iron, aluminium, stainless steel, polyester, carbon, concrete, PVC, copper, ceramics and tiles
- Coverage: 10–15 m² per litre per coat
- Coats: At least 2
- Dry film thickness: 60–100 μm
- Application: Brush, roller, conventional air spray gun or airless spray gun
- Thinning: Up to 5% v/v with No. 200 thinner
- Tool cleaning: With No. 200 thinner or warm water and soap immediately after use
- Drying at 23 °C: Touch-dry in 45 minutes; fully dry in 6–8 hours
- Recoating: After 6–12 hours
Specifications
- Type
- Colour
- Colour
- White
- Acrilyc
- No
- Luminosity
- Satine
Quantity
- Volume
- 1.5 lt
- Weight
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.