Skroutz.mt

Blebox PROXISWITCH Smart Switch Wi-Fi 6A
Intermediate Switches

Blebox PROXISWITCH Smart Switch Wi-Fi 6A

Key features:

  • Suitable for Lighting
  • Connectivity: Wi-Fi
  • Voltage 12-24V
See full description

Top specs

  • Connectivity

    Wi-Fi

    The most common connectivity option for individual switches, as it connects directly to the router.

  • Usage

    Lighting

    For remote control of lamps and lighting fixtures.

  • Maximum Load

    It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

    For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
  • Dimensions 50x40x19mm
  • See all
43 90 €
Delivery Thu, 12 Nov - Wed, 18 Nov
14,00 €   shipping cost
Sent from Greece
From Getters 4.6 (112)
4.6 (112 reviews)
Greece
6 pieces
See Sockets & Switches on the page of Getters

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Product report

Description

Description

The Blebox proxiSwitch switch controls lighting with a touch or by bringing your hand near it, thanks to its capacitive proximity sensor. It can be installed beneath a non-conductive surface, such as a countertop or piece of furniture, allowing it to be operated without a visible button. Its sensitivity is adjusted automatically at startup and every 15 seconds.

It operates on a 12–24 V DC power supply and supports four modes: bistable, bistable with state memory, monostable NO and monostable NC. In monostable mode, the maximum detection time is 8 seconds. It can also be connected to the button input of compatible BleBox controllers, such as wLightBoxS, wLightBox, pixelBox and switchBoxDC.

  • Connectivity: Wi-Fi
  • Type: Smart switch
  • Quantity: 1
  • Maximum load: 6 A
  • Use: Lighting
  • Control method: Touch or hand proximity
  • Supply voltage: 12–24 V DC
  • Sensor: Capacitive proximity sensor
  • Detection range: Up to 3 cm through plexiglass, solid wood, plywood and particleboard; covers the entire surface when installed under metal; does not detect through honeycomb panels
  • Modes: Bistable, bistable with state memory, monostable NO, monostable NC
  • Operating indicator: Blue diagnostic LED
  • Power consumption: Less than 0.1 W
  • Enclosure: Halogen-free, self-extinguishing polyurethane compound, thermal class B (130 °C)
  • Protection rating: IP20
  • Installation: Beneath a non-conductive surface, using adhesive strips
  • Operating temperature: From -20 to +50 °C
  • Dimensions: 50 × 40 × 19 mm
  • Compatibility: wLightBoxS, wLightBox, pixelBox, switchBoxDC

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Switch Type
Smart Switch
Usage
Lighting

Usage

Lighting

For remote control of lamps and lighting fixtures.
Dimensions (Spec Summary)
50x40x19mm

Smart Attributes

Connectivity
Wi-Fi

Connectivity

Wi-Fi

The most common connectivity option for individual switches, as it connects directly to the router.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
6 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Pieces
1

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

The Blebox proxiSwitch switch controls lighting with a touch or by bringing your hand near it, thanks to its capacitive proximity sensor. It can be installed beneath a non-conductive surface, such as a countertop or piece of furniture, allowing it to be operated without a visible button. Its sensitivity is adjusted automatically at startup and every 15 seconds.

It operates on a 12–24 V DC power supply and supports four modes: bistable, bistable with state memory, monostable NO and monostable NC. In monostable mode, the maximum detection time is 8 seconds. It can also be connected to the button input of compatible BleBox controllers, such as wLightBoxS, wLightBox, pixelBox and switchBoxDC.

  • Connectivity: Wi-Fi
  • Type: Smart switch
  • Quantity: 1
  • Maximum load: 6 A
  • Use: Lighting
  • Control method: Touch or hand proximity
  • Supply voltage: 12–24 V DC
  • Sensor: Capacitive proximity sensor
  • Detection range: Up to 3 cm through plexiglass, solid wood, plywood and particleboard; covers the entire surface when installed under metal; does not detect through honeycomb panels
  • Modes: Bistable, bistable with state memory, monostable NO, monostable NC
  • Operating indicator: Blue diagnostic LED
  • Power consumption: Less than 0.1 W
  • Enclosure: Halogen-free, self-extinguishing polyurethane compound, thermal class B (130 °C)
  • Protection rating: IP20
  • Installation: Beneath a non-conductive surface, using adhesive strips
  • Operating temperature: From -20 to +50 °C
  • Dimensions: 50 × 40 × 19 mm
  • Compatibility: wLightBoxS, wLightBox, pixelBox, switchBoxDC

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Switch Type
Smart Switch
Usage
Lighting

Usage

Lighting

For remote control of lamps and lighting fixtures.
Dimensions (Spec Summary)
50x40x19mm

Smart Attributes

Connectivity
Wi-Fi

Connectivity

Wi-Fi

The most common connectivity option for individual switches, as it connects directly to the router.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
6 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Pieces
1

Features

Dimmer
No

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
43,90 €
14,00 €   shipping cost