Berling Write Off clear varnish transforms walls, plaster, exposed concrete and wood into surfaces for writing on with erasable markers. It is a water-based, two-component product containing polyurethane resins, and leaves the substrate’s colour unchanged. It can be applied to surfaces already painted with plastic or acrylic paint, as well as to new, properly prepared surfaces.
Its clear finish has a gloss level of over 85 units at 60°. It is resistant to chemicals, UV radiation and yellowing, and has VOC emissions of up to 70 g/L. Intended for professional use.
- Type: Two-component varnish
- Colour: Clear
- Volume: 1 L
- Composition: Water-based polyurethane resins
- Use: Creates a surface for writing on with erasable markers
- Suitable surfaces: Walls, plaster, exposed concrete and wood
- Application on painted surfaces: Plastic or acrylic paints
- Gloss: Over 85 units at 60°
- Coverage: 10–12 m²/L
- Touch-dry time: 1–1.5 hours
- Through-dry time: At least 24 hours
- Time to full chemical resistance: 7 days
- Recoat time: 2–24 hours
- Mixing ratio: 3 parts Component A to 1 part Component B by volume
- Pot life: 2.5 hours at 25°C
- Thinning for primer coat: Up to 15% with water
- Thinning for finishing coats: 5–6% with water
- Final system: 3 coats
- Application temperature: 12–30°C
- Application relative humidity: Up to 75%
- VOC emissions: Up to 70 g/L
- Tool cleaning: With soap and water
- Package contents: Components A and B
Specifications
- Type
- Colour
- Colour
- Transparent
- Acrilyc
- No
Quantity
- Volume
- 1 lt
- Weight
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.