- To ensure proper adhesion of the product, the surface must be cleaned of dust, grease, oils, peeling old paints, rust, mold or moisture residues.
- Apply the product directly onto the surface
- Clean with a mild detergent 5 days after the painting is completed
- The product acquires all its mechanical strength after 20 - 30 days.
Description
Specifications
Special paint for painting tiles in the bathroom and kitchen. It is applied directly without a primer and creates an excellent result. It has excellent adhesion and high resistance to water, abrasion, and soaps.
Surface Preparation
- To ensure proper adhesion of the product, the surface must be cleaned of dust, grease, oils, peeling old paints, rust, mold or moisture residues.
- Apply the product directly onto the surface
- Clean with a mild detergent 5 days after the painting is completed
- The product acquires all its mechanical strength after 20 - 30 days.
Application Conditions
Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is greater than 80%. Adverse conditions during application can alter the final properties of the product.
Application Tools
- Brush
- Roller
During work, keep the tools "wet" inside the container. Drain the product well from the tools and clean them immediately with white spirit. If the product dries, it can only be removed with strong detergents. Do not empty the washing liquids into the water table.
Performance
12-14m2 / Lt on suitably prepared surfaces.
Thinning
1 - 5% White Spirit
Drying
4 - 5 hours depending on the application conditions
Specifications
- Type
- Colour
- Colour
- White
- Acrilyc
- No
Quantity
- Volume
- 0.75 lt
- Weight
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.