Skroutz.mt

Leo Group 5ACSm100S Electric Surface Water Pump with Automatic Suction 1.25hp Single-Phase
Surface Water Pumps

Leo Group 5ACSm100S Electric Surface Water Pump with Automatic Suction 1.25hp Single-Phase Code: 01018

Key features:

  • Power: 1.25 HP (900 watt)
  • Maximum head: 55 m
  • Maximum flow rate: 6.0 m³/h
  • Impeller diameter: 100 mm
  • Impeller stages: 5
See full description

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
Review the product
Product report

Description

Description

Horizontal multi-stage pump, made of stainless steel and operates quietly. Ideal for domestic use, pressure units, and small agricultural applications for irrigation. Suitable for clean liquids, free of solids in suspension or corrosive substances, low viscosity fluids, and chemically neutral.

  • Type: LEPONO 5XCm100S
  • Power: 1.25 HP (900 watt)
  • Maximum head: 55 m
  • Maximum flow rate: 6.0 m³/h
  • Impeller diameter: 100 mm
  • Impeller stages: 5
  • Motor housing: Cast iron
  • Shaft: INOX AISI 3104
  • Impeller material: Noryl
  • Pump housing: Stainless steel
  • Voltage: 230V
  • Current: 6.2 A
  • Outlet connections: 1’’
  • Maximum operating pressure: 8 bar
  • Temperature range: -10 to +40°
  • Horizontal multistage pump, made of stainless steel with silent operation. 
  • Ideal for domestic use, pressure booster systems, and small agricultural applications, for irrigation. 
  • Suitable for clean liquids, without suspended solids or corrosive substances, low-viscosity and chemically neutral.

Features & Specifications

  • Power: 1.25 HP (900 watt)
  • Maximum head: 55 m
  • Maximum flow rate: 6.0 m³/h
  • Impeller diameter: 100 mm
  • Impeller stages: 5
  • Motor housing: Cast iron
  • Shaft: INOX AISI 3104
  • Impeller material: Noryl
  • Pump housing: Stainless steel
  • Voltage: 230V
  • Current: 6.2 A
  • Inlet/outlet connections: 1’’
  • Maximum operating pressure: 8 bar
  • Temperature range: -10 to +40°

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
01018

Main Specifications

Type
Multistage

Type

Multistage
Pumps with 3 or more blades exert high pressure and achieve maximum efficiency. Ideal for homes with low water pressure.
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1.25 hp
Power
900 W
Flow Rate
6 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
60 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Horizontal multi-stage pump, made of stainless steel and operates quietly. Ideal for domestic use, pressure units, and small agricultural applications for irrigation. Suitable for clean liquids, free of solids in suspension or corrosive substances, low viscosity fluids, and chemically neutral.

  • Type: LEPONO 5XCm100S
  • Power: 1.25 HP (900 watt)
  • Maximum head: 55 m
  • Maximum flow rate: 6.0 m³/h
  • Impeller diameter: 100 mm
  • Impeller stages: 5
  • Motor housing: Cast iron
  • Shaft: INOX AISI 3104
  • Impeller material: Noryl
  • Pump housing: Stainless steel
  • Voltage: 230V
  • Current: 6.2 A
  • Outlet connections: 1’’
  • Maximum operating pressure: 8 bar
  • Temperature range: -10 to +40°
  • Horizontal multistage pump, made of stainless steel with silent operation. 
  • Ideal for domestic use, pressure booster systems, and small agricultural applications, for irrigation. 
  • Suitable for clean liquids, without suspended solids or corrosive substances, low-viscosity and chemically neutral.

Features & Specifications

  • Power: 1.25 HP (900 watt)
  • Maximum head: 55 m
  • Maximum flow rate: 6.0 m³/h
  • Impeller diameter: 100 mm
  • Impeller stages: 5
  • Motor housing: Cast iron
  • Shaft: INOX AISI 3104
  • Impeller material: Noryl
  • Pump housing: Stainless steel
  • Voltage: 230V
  • Current: 6.2 A
  • Inlet/outlet connections: 1’’
  • Maximum operating pressure: 8 bar
  • Temperature range: -10 to +40°

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
01018

Main Specifications

Type
Multistage

Type

Multistage
Pumps with 3 or more blades exert high pressure and achieve maximum efficiency. Ideal for homes with low water pressure.
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1.25 hp
Power
900 W
Flow Rate
6 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
60 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

129,90 €
47,00 €   shipping cost