Skroutz.mt

Alpine Car Speaker Set Separate 5.25" with 65W RMS (2 Way)
Car Speakers

Alpine Car Speaker Set Separate 5.25" with 65W RMS (2 Way) Code: SPG-13CS

Car Speakers Alpine SPG-13CS Component 5.25" 13cm 250W Peak 65W RMS 2-Way - Pair of 2 Pieces

The new Type-G series of component and coaxial speakers is designed for high power handling. These speakers...

Car Speakers Alpine SPG-13CS Component 5.25" 13cm 250W Peak 65W RMS 2-Way - Pair of 2 Pieces

The new Type-G series of component and coaxial speakers is designed for high power handling. These speakers offer good sound quality, thanks to the tweeter, the Kapton frame winding coil, and the capacitor.

  • Tweeter
    • Tweeter Type: 20mm Silk Soft Dome Tweeter
    • ...
See full description See full description

  • RMS Power

    The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.

  • Resistance

     The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

  • Maximum Power

    The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

Car Speakers Alpine SPG-13CS Component 5.25" 13cm 250W Peak 65W RMS 2-Way - Pair of 2 Pieces

The new Type-G series of component and coaxial speakers is designed for high power handling. These speakers offer good sound quality, thanks to the tweeter, the Kapton frame winding coil, and the capacitor.

  • Tweeter
    • Tweeter Type: 20mm Silk Soft Dome Tweeter
    • Application Type: Swivel frame
    • Magnet Material: Neodymium Magnet
  • Woofer
    • Cone Material: Polypropylene Cone
    • Coil Type: Linear Wiring Coil
    • Magnet: Ferrite Magnet
    • Frame: Fixed Shape Frame
    • Design: Elongated Design
  • Crossover Network
    • Design: Separate Network Design Capability
    • Attenuation Adjustment: 3-Levels
    • Mounting Frame: Screws for Easy Installation

Technical Details:

  • Maximum Power: 250W
  • RMS Power: 65W
  • Woofer Diameter: 11.00cm
  • Woofer Depth: 4.3cm
  • Frequency Response: 65Hz to 20kHz
  • Impedance: 4Ω
  • Sensitivity: 87dB/W (1m)

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
SPG-13CS

Dimensions

Type
2 Way

Type

2 Way

Speakers consisting of two ways: one for the treble (high frequencies) and one for the bass (low frequencies). Ideal for use in basic systems or for limited space.
Shape
Round
Round Speakers Diameter
5.25 "

Technical Specifications

Peak Power
250 W

Peak Power

The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
Power (RMS)
65 W

Power (RMS)

The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.
Nominal Impendance
4 ohm

Nominal Impendance

 The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

Car Speakers Alpine SPG-13CS Component 5.25" 13cm 250W Peak 65W RMS 2-Way - Pair of 2 Pieces

The new Type-G series of component and coaxial speakers is designed for high power handling. These speakers offer good sound quality, thanks to the tweeter, the Kapton frame winding coil, and the capacitor.

  • Tweeter
    • Tweeter Type: 20mm Silk Soft Dome Tweeter
    • Application Type: Swivel frame
    • Magnet Material: Neodymium Magnet
  • Woofer
    • Cone Material: Polypropylene Cone
    • Coil Type: Linear Wiring Coil
    • Magnet: Ferrite Magnet
    • Frame: Fixed Shape Frame
    • Design: Elongated Design
  • Crossover Network
    • Design: Separate Network Design Capability
    • Attenuation Adjustment: 3-Levels
    • Mounting Frame: Screws for Easy Installation

Technical Details:

  • Maximum Power: 250W
  • RMS Power: 65W
  • Woofer Diameter: 11.00cm
  • Woofer Depth: 4.3cm
  • Frequency Response: 65Hz to 20kHz
  • Impedance: 4Ω
  • Sensitivity: 87dB/W (1m)

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
SPG-13CS

Dimensions

Type
2 Way

Type

2 Way

Speakers consisting of two ways: one for the treble (high frequencies) and one for the bass (low frequencies). Ideal for use in basic systems or for limited space.
Shape
Round
Round Speakers Diameter
5.25 "

Technical Specifications

Peak Power
250 W

Peak Power

The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
Power (RMS)
65 W

Power (RMS)

The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.
Nominal Impendance
4 ohm

Nominal Impendance

 The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product