Description
Specifications
Vitex Anti-Rust Primer is designed for interior and exterior metal surfaces and serves as a primer for the topcoat. Its formula is based on a blend of modified alkyd resins and is touch-dry in 45–60 minutes.
Apply with a roller, brush or spray gun in one or two coats, thinning by up to 5% with the appropriate thinner. Coverage is 12–14 m²/L for one coat and 6–7 m²/L for two coats. After 20–24 hours, once fully dry, sand the surface before applying the topcoat.
- Type: Anti-rust primer
- Surface material: Metal
- Use: Interior and exterior
- Colour: Grey
- Volume: 0.75 L
- Base: Modified alkyd resins
- Thinning: Up to 5% with T300 brush thinner for roller or brush application, or T350 spray thinner for spray-gun application
- Application tools: Roller, brush or spray gun
- Touch-dry time: 45–60 minutes
- Time before applying topcoat: 20–24 hours
- Coverage: 12–14 m²/L for one coat; 6–7 m²/L for two coats
- Application temperature: 5–35 °C
- Relative humidity during application: Below 80%
- VOC content: Up to 449 g/L in the ready-to-use product
- Tool cleaning: Clean with T300 brush thinner, then soap or detergent for rollers and brushes; use T350 spray thinner for spray guns
- Storage: In closed containers, in a shaded place, at 5–38 °C
Specifications
- Genre
- Primer
- Surface Material
- Metal
- Surfaces
- Multiprimer
- Properties
- Antirust
Quantity
- Mass Gaining
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.