Skroutz.mt

Vitex Wash Primer Αντισκωριακό Αστάρι Δύο Συστατικών Suitable for Aluminum / Glass / Non-Ferrous Metals 0.82lt
Primers

Vitex Wash Primer Αντισκωριακό Αστάρι Δύο Συστατικών Suitable for Aluminum / Glass / Non-Ferrous Metals 0.82lt

Vitex Wash Primer is a two-component primer intended for glossy surfaces such as aluminium, galvanized sheet metal, polyester, glass and stainless steel. It provides corrosion protection for...

Vitex Wash Primer is a two-component primer intended for glossy surfaces such as aluminium, galvanized sheet metal, polyester, glass and stainless steel. It provides corrosion protection for aluminium, galvanized sheet metal and stainless steel. It is ready to use after the components have been mixed and is applied undiluted.

Before application, clean the...

See Description & Specifications See Description & Specifications
The product is not available for shipping to the selected country.

Reviews (5)

Reviews

5.0
5
5.0
Review this product
  1. 5
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • milonasastro
    5
    8 out of 9 members found this review helpful
    milonasastro

    Verified purchase

    The best I have ever tried. Get it with closed eyes, it does exactly what it says. It has a slightly off-white color, not white. It requires attention and disciplined process but not difficult. You can easily avoid it from drying out as long as you paint at reasonable temperatures of 15-25 degrees. I have used it on many glossy materials and it is perfect. It sticks and does not come off at all. If you have, for example, galvanized iron fences outside, use it and they will never rust or peel off!!! Of course, after the VITEX WASH PRIMER, you will paint with a good plain color, for example, VITEX HEAVY METAL SILICON in the shade you want. Finally, in 90% of cases, paint with a very small roller or a large one, not with a brush.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    OKOYNELOS

    Verified purchase

  • 5
    bvlahos

    Verified purchase

  • 5
    vzspot

    Verified purchase

  • 5
    mark.intj

    Verified purchase

  • milonasastro
    5
    milonasastro

    The best I have ever tried. Get it with closed eyes, it does exactly what it says. It has a slightly off-white color, not white. It requires attention and disciplined process but not difficult. You can easily avoid it from drying out as long as you paint at reasonable temperatures of 15-25 degrees. I have used it on many glossy materials and it is perfect. It sticks and does not come off at all. If you have, for example, galvanized iron fences outside, use it and they will never rust or peel off!!! Of course, after the VITEX WASH PRIMER, you will paint with a good plain color, for example, VITEX HEAVY METAL SILICON in the shade you want. Finally, in 90% of cases, paint with a very small roller or a large one, not with a brush.

    Translated from Greek ·
    8
  • 5
    OKOYNELOS

    0
  • 5
    bvlahos

    0
  • 5
    vzspot

    0
  • 5
    mark.intj

    0
  • See all
Product report

Description & Specifications

Vitex Wash Primer is a two-component primer intended for glossy surfaces such as aluminium, galvanized sheet metal, polyester, glass and stainless steel. It provides corrosion protection for aluminium, galvanized sheet metal and stainless steel. It is ready to use after the components have been mixed and is applied undiluted.

Before application, clean the surfaces with T300 Brush Thinner. They must be dry, smooth, free of dust and oil, and sanded with suitable sandpaper. Use the mixture 5–10 minutes after mixing; its pot life is 2–3 hours. Apply one coat with a roller, brush or spray gun. Once fully dry, sand the surface and remove the dust before applying the topcoat.

  • Type: Two-component primer
  • Substrates: Aluminium, glass, non-ferrous metals, galvanized sheet metal, polyester and stainless steel
  • Properties: Corrosion protection
  • Application surfaces: Interior and exterior
  • Colour: Light yellow
  • Thinning: Apply undiluted
  • Mixing ratio: 1.5:1 by volume (Component A/Component B)
  • Pot life: 2–3 hours
  • Touch-dry time: 45–60 minutes
  • Recoat time: After 6–8 hours and no later than 2 days
  • Coverage: 10–12 m²/L per coat
  • Application: By roller, brush or spray gun
  • Application temperature: 5–35 °C
  • Relative humidity during application: Below 80%
  • Volume: 0.82 L
  • Package contents: Component A: 492 ml and Component B: 328 ml

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Genre
Primer
Surface Material
Aluminum, Glass, Non-Ferrous Metals
Surfaces
Multiprimer
Properties
Antirust

Quantity

Mass Gaining
0.82 lt

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (5)

5.0
5
5.0
Review this product
  1. 5
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • milonasastro
    5
    8 out of 9 members found this review helpful
    milonasastro

    Verified purchase

    The best I have ever tried. Get it with closed eyes, it does exactly what it says. It has a slightly off-white color, not white. It requires attention and disciplined process but not difficult. You can easily avoid it from drying out as long as you paint at reasonable temperatures of 15-25 degrees. I have used it on many glossy materials and it is perfect. It sticks and does not come off at all. If you have, for example, galvanized iron fences outside, use it and they will never rust or peel off!!! Of course, after the VITEX WASH PRIMER, you will paint with a good plain color, for example, VITEX HEAVY METAL SILICON in the shade you want. Finally, in 90% of cases, paint with a very small roller or a large one, not with a brush.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    OKOYNELOS

    Verified purchase

  • 5
    bvlahos

    Verified purchase

  • 5
    vzspot

    Verified purchase

  • 5
    mark.intj

    Verified purchase

  • milonasastro
    5
    milonasastro

    The best I have ever tried. Get it with closed eyes, it does exactly what it says. It has a slightly off-white color, not white. It requires attention and disciplined process but not difficult. You can easily avoid it from drying out as long as you paint at reasonable temperatures of 15-25 degrees. I have used it on many glossy materials and it is perfect. It sticks and does not come off at all. If you have, for example, galvanized iron fences outside, use it and they will never rust or peel off!!! Of course, after the VITEX WASH PRIMER, you will paint with a good plain color, for example, VITEX HEAVY METAL SILICON in the shade you want. Finally, in 90% of cases, paint with a very small roller or a large one, not with a brush.

    Translated from Greek ·
    8
  • 5
    OKOYNELOS

    0
  • 5
    bvlahos

    0
  • 5
    vzspot

    0
  • 5
    mark.intj

    0
  • See all