Description
Specifications
Isomat Primer Classic acrylic primer is micronized and water-soluble, suitable for new plaster, concrete and brick surfaces to be painted with emulsion paints. It offers high penetration and strong adhesion, while its slightly blue tint helps identify surfaces that have been fully primed.
It is also used to stabilize porous surfaces covered with limewash, adhesives or old paint, and protects them from moisture. It is odorless and environmentally and user-friendly, making it suitable for occupied indoor spaces.
- Type: Micronized water-based acrylic primer
- Substrate: Building materials and masonry
- Use: Interior and exterior surfaces
- Colour: Slightly blue
- Properties: Odorless, with strong adhesion and high penetration
- Application: With a roller, brush or airless spray gun, in one coat
- Dilution: Up to 50% with clean water; not required on highly absorbent surfaces
- Surface preparation: Dry and free of grease, loose material and dust
- Application and drying temperature: From +10 °C to +35 °C
- Touch-dry time: 1 h
- Recoat time: 4 h
- Coverage: 10–15 m² per litre per coat, depending on absorbency and dilution
- Tool cleaning: With water and detergent immediately after use
- Volume: 5 L
Specifications
- Genre
- Primer
- Surface Material
- Construction Materials, Masonry
- Surfaces
- Multiprimer
- Properties
- Acrylic
Quantity
- Mass Gaining
- 5 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.