Description
Specifications
Berling Fungistop wood preservative protects exterior wooden surfaces from fungi, blue stain, insects and termites. It is colourless, solvent-based and ready to use, while improving the adhesion of the varnish or paint applied afterwards.
It is applied to new, unpainted wood that is not in direct contact with the ground or water, such as windows, exterior doors, cladding, fences and carports. The wood must be clean and completely dry, with a moisture content of up to 18%. A topcoat for exterior use must be applied afterwards.
- Type: Wood preservative
- Thinning: Solvent-based, ready to use without thinning
- Colour: Colourless
- Gloss level: Matt
- Use: Exterior
- Protection: Against fungi, blue stain, insects and termites
- Coverage: 200 ml/m² (theoretical)
- Touch-dry: Approximately 1–2 hours
- Recoating: Approximately 24 hours after surface drying, at 23 °C and 60% relative humidity
- Application conditions: Temperature above 5 °C and relative humidity below 80%
- Standards: EN 113, EN 46, EN 118, EN 84, EN 73, EN 152
- Biocidal product registration number: TP8-0068
- Quantity: 750 ml
- Product Number
- 09832
- Type
- Preservative
- Surface Material
- of Wood
- Glossiness
- Matte
- Insecticide / Antifungal
- Yes
- Diluting Agent
- Solvent Based
- Polyurethane
- No
- 2-Component
- No
- Quantity
- 0.75 lt
- Colour
- Colorless
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.